[Thu Jun 14 10:11:29 2012] Detection parameters:
  Position = (507.8, 334.0) = 2 7 30.87 35 24 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.0 +/- 8.8
  Background counts = 7.5
  Rate = 0.001 +/- 0.0002

[Thu Jun 14 10:11:29 2012] Off-axis axis estimate = 15.40'
[Thu Jun 14 10:15:10 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:15:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 10:15:10 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Thu Jun 14 10:15:10 2012] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.139
[Thu Jun 14 10:15:10 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 14.13"
[Thu Jun 14 11:05:02 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jun 14 11:05:02 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jun 14 11:05:02 2012] Fit fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src33 appears to have run properly
[Thu Jun 14 11:05:03 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jun 14 11:05:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jun 14 11:05:03 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jun 14 11:05:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jun 14 11:05:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 11:55:26 2012] Spatial fit model total counts = 149.296000, observed total counts = 135.000000
[Thu Jun 14 11:55:26 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 11:55:26 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 11:55:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 11:55:26 2012] Assessing source extent using major
[Thu Jun 14 11:55:26 2012] Source does appear to be extended
[Thu Jun 14 11:55:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 11:55:40 2012] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 11:55:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 11:55:40 2012] Initial guess for spatial extent in simple fitting = 14.13"
[Thu Jun 14 11:55:40 2012] source mask rpix=3.2, npix_max = 56, mask sum = 64, frac = 1.139
[Thu Jun 14 11:55:40 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 14.13"
[Thu Jun 14 12:30:13 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src28.ximg exists
[Thu Jun 14 12:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src28.csv
[Thu Jun 14 12:30:14 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Jun 14 12:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src28.csv
[Thu Jun 14 12:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 12:30:14 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Jun 14 12:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Jun 14 12:30:14 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Jun 14 12:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Thu Jun 14 12:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 13:21:08 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 12.476958 pixels away
[Thu Jun 14 13:21:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 13:21:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 13:21:08 2012] Assessing source extent using major
[Thu Jun 14 13:21:08 2012] Source does appear to be extended
[Thu Jun 14 13:21:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 13:21:20 2012] XMMSAS src. selection expression = ellipse(44132.748657, 29013.222351, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 13:21:20 2012] Writing source region out to fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src24_src.reg
[Thu Jun 14 13:21:20 2012] Extracting stamp from image fullrun_mos1_xmm0084140101_pi300-10000_cl_sm2.00.img.gz, (470, 297) - (545, 372)
[Thu Jun 14 13:21:20 2012] XMMSAS bgd. selection expression = annulus(44132.748657, 29013.222351, 1087.500000, 2175.000000, X, Y)
[Thu Jun 14 13:21:20 2012] Writing fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src24.gif
[Thu Jun 14 13:28:57 2012] Mean detx,y = (8643.84, 14076.73) 
[Thu Jun 14 13:28:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 13:29:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 13:29:16 2012] Setting source spectrum file to fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Jun 14 13:29:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Jun 14 13:46:08 2012] Not generating rmf since there are only 37 counts
[Thu Jun 14 13:46:08 2012] rmf not generated due to insufficient counts
[Thu Jun 14 14:06:10 2012] Updating aperture counts using extracted products
[Thu Jun 14 14:06:10 2012] Error reading totcts from fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Jun 14 14:06:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:06:10 2012] Using photon index=1.80, rate=0.000989, arf fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src24.arf
[Thu Jun 14 14:06:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:06:10 2012] Updating source flux to 2.5e-14
[Thu Jun 14 14:06:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting