[Thu Jun 14 10:11:29 2012] Detection parameters:
  Position = (391.6, 361.9) = 2 8 12.20 35 26 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.6 +/- 7.6
  Background counts = 9.7
  Rate = 0.001 +/- 0.0003

[Thu Jun 14 10:11:29 2012] Off-axis axis estimate = 8.18'
[Thu Jun 14 10:15:10 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:15:10 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Thu Jun 14 10:15:10 2012] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.675
[Thu Jun 14 10:15:10 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.52"
[Thu Jun 14 11:05:02 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jun 14 11:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src28.csv
[Thu Jun 14 11:05:02 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jun 14 11:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src28.csv
[Thu Jun 14 11:05:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 11:05:03 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jun 14 11:05:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun 14 11:05:03 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jun 14 11:05:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun 14 11:05:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 11:55:26 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.683107 pixels away
[Thu Jun 14 11:55:26 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 11:55:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 11:55:26 2012] Assessing source extent using major
[Thu Jun 14 11:55:26 2012] Source does appear to be extended
[Thu Jun 14 11:55:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 11:55:26 2012] Deleting source due to low Poisson probability 0.9