[Thu Jun 14 10:11:29 2012] Detection parameters:
  Position = (385.5, 378.8) = 2 8 14.38 35 28 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.7 +/- 12.1
  Background counts = 9.3
  Rate = 0.003 +/- 0.0005

[Thu Jun 14 10:11:29 2012] Off-axis axis estimate = 8.59'
[Thu Jun 14 10:15:10 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:15:10 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Thu Jun 14 10:15:10 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.853
[Thu Jun 14 10:15:10 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.72"
[Thu Jun 14 11:05:02 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jun 14 11:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src11.csv
[Thu Jun 14 11:05:02 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jun 14 11:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src11.csv
[Thu Jun 14 11:05:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 11:05:02 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jun 14 11:05:02 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jun 14 11:05:02 2012] Fit fullrun_mos1_xmm0084140101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jun 14 11:55:26 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.473046 pixels away
[Thu Jun 14 11:55:26 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 11:55:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 11:55:26 2012] Assessing source extent using major
[Thu Jun 14 11:55:26 2012] Source does appear to be extended
[Thu Jun 14 11:55:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 11:55:40 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 11:55:40 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Thu Jun 14 11:55:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.853
[Thu Jun 14 11:55:40 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.72"
[Thu Jun 14 12:30:13 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jun 14 12:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 14 12:30:13 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jun 14 12:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src11.csv
[Thu Jun 14 12:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 12:30:14 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jun 14 12:30:14 2012] fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jun 14 12:30:14 2012] Fit fullrun_mos1_xmm0084140101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jun 14 13:21:08 2012] Spatial fit model total counts = 152.333000, observed total counts = 153.000000
[Thu Jun 14 13:21:08 2012] Offset between fit and detection position for source 17 = 0.273396 pixels
[Thu Jun 14 13:21:08 2012] 150.341000 total counts/ 77.304700 bgd. counts: snr = 8.306839
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.273396 pixels
  Position = (385.5, 378.5) = 2 8 14.38 35 28 2.6
  Extent = 7.1 (5.3-8.9)", rotation angle = 0
  Source counts = 73.0 +/- 12.3
  Background counts = 77.3
  Rate = 0.002 +/- 0.0003
[Thu Jun 14 13:21:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 13:21:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 13:21:08 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 13:21:08 2012] Source does appear to be extended
[Thu Jun 14 13:21:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 13:21:20 2012] XMMSAS src. selection expression = ellipse(33488.675800, 32880.172800, 425.784612, 425.784612, 0.000000, X, Y)
[Thu Jun 14 13:21:20 2012] Writing source region out to fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src17_src.reg
[Thu Jun 14 13:21:20 2012] Extracting stamp from image fullrun_mos1_xmm0084140101_pi300-10000_cl_sm2.00.img.gz, (361, 354) - (410, 403)
[Thu Jun 14 13:21:20 2012] XMMSAS bgd. selection expression = annulus(33488.675800, 32880.172800, 709.641020, 1419.282041, X, Y) && !ellipse(32538.497200, 33753.756600, 432.897612, 432.897612, 0.000000, X, Y)
[Thu Jun 14 13:21:20 2012] Writing fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src17.gif
[Thu Jun 14 13:23:45 2012] Mean detx,y = (7998.44, 2797.31) 
[Thu Jun 14 13:23:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 13:23:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 13:23:54 2012] Setting source spectrum file to fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jun 14 13:23:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Jun 14 13:44:59 2012] Not generating rmf since there are only 73 counts
[Thu Jun 14 13:44:59 2012] rmf not generated due to insufficient counts
[Thu Jun 14 14:06:10 2012] Updating aperture counts using extracted products
[Thu Jun 14 14:06:10 2012] Error reading totcts from fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jun 14 14:06:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 14:06:10 2012] Using photon index=1.80, rate=0.0019, arf fullrun_mos1_xmm0084140101_pi300-10000_pass1_cl_src17.arf
[Thu Jun 14 14:06:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 14:06:10 2012] Updating source flux to 3.1e-14
[Thu Jun 14 14:06:12 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting