Processing completion:

Field: xmm0084110201

Detector Exposure (Original/High-E Flare Cleaned/Low-E Cleaned) Image binning Plate scale ("/pixel) Bgd. level (orig/High-E flare cleaned/cleaned, counts/sq. arcmin/s) GTI file Bgd. light curves Roll angle CCD counts Extra info
mos1 38626 | 38621 | 38621 1.00 4.35 0.025/0.025/0.025 Yes orig clean ccd2:68312 ccd3:131715 ccd4:94040 ccd5:83649 ccd6:131501 ccd7:73161 filter=Thick
mos2 39003 | 31998 | 31998 1.00 4.35 0.087/0.082/0.082 Yes orig clean ccd1:4015447 ccd2:90298 ccd3:118432 ccd4:80171 ccd5:85294 ccd6:129798 ccd7:101738 filter=Thick

Source List (gives positions and fluxes and links for detailed analyses)

205 source(s) in memory
Iteration: 2
|mos1 |mos2 |
init Complete
acquire Complete
reduce Complete
detect Complete
timeclean Complete
simplespatial Complete
assess Complete
extract Complete
reassess Complete
spectral Complete
temporal Complete
spatial Complete
correl Skip
sim Skip
qlook Skip
xray image
No Skyview images present

Xray image, smoothed with a 2 pixel gaussian

Skyview image(s) of FOV (with X-ray sources marked)

Color code (marks may only appear on detector-specific images for multi-detector missions, see links above): green = point source, red = problematic/questionable source, blue = extended source, magenta = asymmetric source (may be extended), cyan = estimated detector boundary, purple = "Region of Interest" (if set)

Python version = 2.5.4 (r254:67916, Aug 14 2009, 18:07:15) [GCC 4.1.1 20070105 (Red Hat 4.1.1-52)]
Headas version = 6.11
XAssist version = 1.000
SAS version = xmmsas_20110223_1801-11.0.0
numpy version = 1.3.0
Pyfits version = 2.1.1
XAssist originally started on this data set at Tue Nov 29 09:59:03 2011
This data set was last accessed on Tue Nov 29 09:59:03 2011
Current user = xassist on x3.localdomain
Number of fields in memory = 1
Current field being processed = xmm0084110201
Position of field target = 18 23 40.60 -30 21 41.0
Current telescope = xmm
Current detector = all
Processing mode = proc
Processing status = OK
Detection method = eboxdetect
Batch processing enabled
Place data, logs, etc. in field subdirectories
Image analysis will be over range of allowed energies
Will analyze each ccd separately

Log files: processing messages |error messages |all messages (very detailed) |source logs