[Tue Nov 29 11:14:19 2011] Detection parameters:
  Position = (307.5, 386.1) = 18 23 42.18 -30 16 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 335.8 +/- 34.5
  Background counts = 331.9
  Rate = 0.02 +/- 0.002

[Tue Nov 29 11:14:26 2011] Off-axis axis estimate = 6.39'
[Tue Nov 29 20:53:47 2011] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 20:53:47 2011] Initial guess for spatial extent in simple fitting = 9.62"
[Tue Nov 29 20:53:47 2011] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.782
[Tue Nov 29 20:53:47 2011] Giving source the simple spatial ID 80 for pass 0, mean size = 9.62"
[Sat Dec  3 11:35:52 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src80.ximg exists
[Sat Dec  3 11:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src80.csv
[Sat Dec  3 11:35:52 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src80_1.ximg exists
[Sat Dec  3 11:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src80.csv
[Sat Dec  3 11:35:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Sat Dec  3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Sat Dec  3 11:35:54 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Sat Dec  3 11:36:38 2011] Spatial fit model total counts = 16825.000000, observed total counts = 16820.000000
[Sat Dec  3 11:36:38 2011] Offset between fit and detection position for source 54 = 6.857777 pixels
[Sat Dec  3 11:36:38 2011] Warning, changing simple spatial fit ID from 80 to 17
[Sat Dec  3 11:36:38 2011] 10498.200024 total counts/ 10498.200000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 6.857777 pixels
  Position = (303.6, 380.4) = 18 23 43.47 -30 17 0.5
  Extent = 18.2 (18.2-36.4)", rotation angle = 0
  Source counts = 0.0 +/- 102.5
  Background counts = 10498.2
  Rate = 7e-10 +/- 0.003
  Deleting source due to low Poisson probability