[Tue Nov 29 11:14:18 2011] Detection parameters: Position = (312.1, 454.9) = 18 23 40.61 -30 11 29.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 814.3 +/- 38.8 Background counts = 87.0 Rate = 0.02 +/- 0.001 [Tue Nov 29 11:14:26 2011] Off-axis axis estimate = 11.39' [Tue Nov 29 20:53:47 2011] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting [Tue Nov 29 20:53:47 2011] Initial guess for spatial extent in simple fitting = 12.12" [Tue Nov 29 20:53:47 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.833 [Tue Nov 29 20:53:47 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 12.12" [Sat Dec 3 11:35:52 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src67.ximg exists [Sat Dec 3 11:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src67.csv [Sat Dec 3 11:35:52 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src67_1.ximg exists [Sat Dec 3 11:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src67.csv [Sat Dec 3 11:35:52 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src67_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists [Sat Dec 3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists [Sat Dec 3 11:35:54 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly [Sat Dec 3 11:36:38 2011] Source 41 is offset by -1.749154 and 0.648868 pixels which is larger than 2 X fitted extent = 1.343968 x 1.343968, not incorporating fit results [Sat Dec 3 11:36:38 2011] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 11.817127 pixels away [Sat Dec 3 11:36:38 2011] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 11.964839 pixels away [Sat Dec 3 11:36:38 2011] Warning, spatial fit 67 centroid is now closest to src. 30 [Sat Dec 3 11:36:38 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 11:36:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 11:36:38 2011] Assessing source extent using major [Sat Dec 3 11:36:38 2011] Source does appear to be extended [Sat Dec 3 11:36:38 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 11:36:38 2011] Source is confused with source 42 [Sat Dec 3 16:39:21 2011] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting [Sat Dec 3 16:39:21 2011] Initial guess for spatial extent in simple fitting = 12.12" [Sat Dec 3 16:39:21 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.833 [Sat Dec 3 16:39:21 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 12.12" [Sun Dec 4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src60.ximg exists [Sun Dec 4 14:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src60.csv [Sun Dec 4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src60_1.ximg exists [Sun Dec 4 14:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src60.csv [Sun Dec 4 14:44:03 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src60_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Dec 4 14:44:05 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists [Sun Dec 4 14:44:05 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists [Sun Dec 4 14:44:05 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly [Sun Dec 4 14:44:32 2011] Source 41 is offset by -1.743434 and 0.648569 pixels which is larger than 2 X fitted extent = 1.343968 x 1.343968, not incorporating fit results [Sun Dec 4 14:44:32 2011] Warning, spatial fit 60 centroid is now closest to src. 30 [Sun Dec 4 14:44:32 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 14:44:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 14:44:32 2011] Assessing source extent using major [Sun Dec 4 14:44:32 2011] Source does appear to be extended [Sun Dec 4 14:44:32 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 4 18:08:28 2011] XMMSAS src. selection expression = ellipse(27108.132629, 39527.491486, 652.500000, 652.500000, 0.000000, X, Y) [Sun Dec 4 18:08:28 2011] Writing source region out to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src41_src.reg [Sun Dec 4 18:08:28 2011] Extracting stamp from image fullrun_mos2_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (275, 417) - (350, 492) [Sun Dec 4 18:08:28 2011] XMMSAS bgd. selection expression = annulus(27108.132629, 39527.491486, 1087.500000, 2175.000000, X, Y) && !ellipse(27099.286072, 37736.230835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27117.608429, 38491.684906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.330780, 41362.522949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27116.360565, 40494.806274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27136.167084, 42233.635406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27081.500000, 39102.777400, 954.656027, 954.656027, 0.000000, X, Y) && !ellipse(27103.653595, 37008.479340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27042.661600, 36556.056000, 1420.448041, 1420.448041, 0.000000, X, Y) && !ellipse(27146.011932, 40932.843628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29162.230000, 31276.350000, 8284.704238, 8284.704238, 0.000000, X, Y) [Sun Dec 4 18:08:28 2011] Writing fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src41.gif [Sun Dec 4 21:02:48 2011] Mean detx,y = (41.99, 11959.28) [Sun Dec 4 21:02:49 2011] Setting backscal keywords in source and bgd. spectrum [Sun Dec 4 21:03:00 2011] Binned source spectrum to 10 counts/bin [Sun Dec 4 21:03:00 2011] Setting source spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Sun Dec 4 21:03:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src41_bgd.pi.gz [Mon Dec 5 12:46:37 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Dec 5 12:46:37 2011] rmf not generated due to insufficient counts [Mon Dec 5 14:00:26 2011] Updating aperture counts using extracted products [Mon Dec 5 14:00:26 2011] Error reading totcts from fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src41_src_b10.pi.gz [Mon Dec 5 14:00:31 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 14:00:31 2011] Using photon index=1.80, rate=0.0209, arf fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src41.arf [Mon Dec 5 14:00:31 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 14:00:31 2011] Updating source flux to 7.3e-13 [Mon Dec 5 14:06:10 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting