[Tue Nov 29 11:14:17 2011] Detection parameters:
  Position = (312.5, 486.0) = 18 23 40.50 -30 9 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 945.4 +/- 42.2
  Background counts = 62.3
  Rate = 0.02 +/- 0.001

[Tue Nov 29 11:14:26 2011] Off-axis axis estimate = 13.64'
[Tue Nov 29 20:53:47 2011] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 20:53:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 20:53:47 2011] Initial guess for spatial extent in simple fitting = 13.25"
[Tue Nov 29 20:53:47 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.114
[Tue Nov 29 20:53:47 2011] Giving source the simple spatial ID 58 for pass 0, mean size = 13.25"
[Sat Dec  3 11:35:51 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src58.ximg exists
[Sat Dec  3 11:35:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src58.csv
[Sat Dec  3 11:35:51 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src58_1.ximg exists
[Sat Dec  3 11:35:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src58.csv
[Sat Dec  3 11:35:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sat Dec  3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sat Dec  3 11:35:54 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Sat Dec  3 11:36:38 2011] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 11.613750 pixels away
[Sat Dec  3 11:36:38 2011] Warning, spatial fit 58 centroid is now closest to src. 39
[Sat Dec  3 11:36:38 2011] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.991332 pixels away
[Sat Dec  3 11:36:38 2011] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.370780 pixels away
[Sat Dec  3 11:36:38 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:38 2011] Assessing source extent using major
[Sat Dec  3 11:36:38 2011] Source does appear to be extended
[Sat Dec  3 11:36:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:38 2011] Source is confused with source 33
[Sat Dec  3 16:39:21 2011] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:39:21 2011] Initial guess for spatial extent in simple fitting = 13.25"
[Sat Dec  3 16:39:21 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.114
[Sat Dec  3 16:39:21 2011] Giving source the simple spatial ID 51 for pass 1, mean size = 13.25"
[Sun Dec  4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src51.ximg exists
[Sun Dec  4 14:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src51.csv
[Sun Dec  4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Dec  4 14:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src51.csv
[Sun Dec  4 14:44:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 14:44:04 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Dec  4 14:44:04 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Dec  4 14:44:04 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun Dec  4 14:44:32 2011] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.639774 pixels away
[Sun Dec  4 14:44:32 2011] Warning, spatial fit 51 centroid is now closest to src. 39
[Sun Dec  4 14:44:32 2011] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.991332 pixels away
[Sun Dec  4 14:44:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:32 2011] Assessing source extent using major
[Sun Dec  4 14:44:32 2011] Source does appear to be extended
[Sun Dec  4 14:44:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 18:08:27 2011] XMMSAS src. selection expression = ellipse(27136.167084, 42233.635406, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 18:08:27 2011] Writing source region out to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src32_src.reg
[Sun Dec  4 18:08:27 2011] Extracting stamp from image fullrun_mos2_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (275, 449) - (350, 524)
[Sun Dec  4 18:08:27 2011] XMMSAS bgd. selection expression = annulus(27136.167084, 42233.635406, 1087.500000, 2175.000000, X, Y) && !ellipse(27121.330780, 41362.522949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27116.360565, 40494.806274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27108.132629, 39527.491486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27142.764832, 42835.113708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.491547, 43535.829041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27146.011932, 40932.843628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27137.470703, 44036.174622, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 18:08:27 2011] Writing fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src32.gif
[Sun Dec  4 20:52:15 2011] Mean detx,y = (39.10, 14686.91) 
[Sun Dec  4 20:52:17 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 20:52:26 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 20:52:26 2011] Setting source spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Dec  4 20:52:26 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Dec  5 12:29:27 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec  5 12:29:27 2011] rmf not generated due to insufficient counts
[Mon Dec  5 14:00:26 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:26 2011] Error reading totcts from fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Dec  5 14:00:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:30 2011] Using photon index=1.80, rate=0.0242, arf fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src32.arf
[Mon Dec  5 14:00:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:30 2011] Updating source flux to 1.4e-12
[Mon Dec  5 14:06:10 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting