[Tue Nov 29 11:14:25 2011] Detection parameters:
  Position = (309.2, 225.0) = 18 23 41.60 -30 28 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 365.5 +/- 27.3
  Background counts = 324.4
  Rate = 0.02 +/- 0.001

[Tue Nov 29 11:14:26 2011] Off-axis axis estimate = 5.38'
[Tue Nov 29 20:53:47 2011] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 20:53:47 2011] Initial guess for spatial extent in simple fitting = 9.12"
[Tue Nov 29 20:53:47 2011] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.779
[Tue Nov 29 20:53:47 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 9.12"
[Sat Dec  3 11:35:52 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src85.ximg exists
[Sat Dec  3 11:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src85.csv
[Sat Dec  3 11:35:52 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src85_1.ximg exists
[Sat Dec  3 11:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src85.csv
[Sat Dec  3 11:35:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sat Dec  3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sat Dec  3 11:35:54 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Sat Dec  3 11:36:38 2011] Warning, spatial fit 85 centroid is now closest to src. 148
[Sat Dec  3 11:36:38 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:38 2011] Assessing source extent using major
[Sat Dec  3 11:36:38 2011] Source does appear to be extended
[Sat Dec  3 11:36:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:38 2011] Source is confused with source 153
[Sat Dec  3 16:39:21 2011] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:39:21 2011] Initial guess for spatial extent in simple fitting = 9.12"
[Sat Dec  3 16:39:21 2011] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.779
[Sat Dec  3 16:39:21 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 9.12"
[Sun Dec  4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src77.ximg exists
[Sun Dec  4 14:44:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src77.csv
[Sun Dec  4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src77_1.ximg exists
[Sun Dec  4 14:44:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src77.csv
[Sun Dec  4 14:44:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 14:44:05 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sun Dec  4 14:44:05 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sun Dec  4 14:44:05 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sun Dec  4 14:44:32 2011] Source 151 is offset by 2.251896 and -7.535991 pixels which is larger than
2 X fitted extent = 5.551402 x 5.551402, not incorporating fit results
[Sun Dec  4 14:44:32 2011] Warning, spatial fit 77 centroid is now closest to src. 141
[Sun Dec  4 14:44:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:32 2011] Assessing source extent using major
[Sun Dec  4 14:44:32 2011] Source does appear to be extended
[Sun Dec  4 14:44:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 18:08:28 2011] XMMSAS src. selection expression = ellipse(26847.822937, 19526.936752, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 18:08:28 2011] Writing source region out to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src151_src.reg
[Sun Dec  4 18:08:28 2011] Extracting stamp from image fullrun_mos2_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (272, 188) - (347, 263)
[Sun Dec  4 18:08:28 2011] XMMSAS bgd. selection expression = annulus(26847.822937, 19526.936752, 1087.500000, 2175.000000, X, Y) && !ellipse(26838.358000, 27821.134000, 7173.024206, 7173.024206, 0.000000, X, Y) && !ellipse(27175.371600, 23756.154000, 4345.896125, 4345.896125, 0.000000, X, Y) && !ellipse(28647.430000, 25112.288000, 8108.688233, 2442.840070, 50.565000, X, Y) && !ellipse(27107.605160, 21680.548000, 3926.112113, 3926.112113, 0.000000, X, Y) && !ellipse(27080.114780, 21284.769800, 697.228820, 697.228820, 0.000000, X, Y) && !ellipse(30231.606000, 25658.408000, 4036.032116, 4036.032116, 0.000000, X, Y) && !ellipse(28236.034000, 22648.288000, 1334.248038, 1334.248038, 0.000000, X, Y) && !ellipse(28662.908000, 21760.192000, 1249.904036, 1249.904036, 0.000000, X, Y) && !ellipse(28512.770569, 22136.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31188.396000, 22306.806000, 3030.704087, 769.643222, 246.761000, X, Y) && !ellipse(29748.806000, 22401.362000, 1042.592030, 1042.592030, 0.000000, X, Y) && !ellipse(27715.420000, 20372.382000, 1191.880034, 1191.880034, 0.000000, X, Y) && !ellipse(25018.805115, 21691.141403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.448517, 19543.525375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.429840, 19008.964432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29374.994000, 20326.847200, 1454.008042, 845.800024, 4.888210, X, Y) && !ellipse(29576.431400, 19994.370000, 1527.384044, 249.691207, 75.959000, X, Y) && !ellipse(27436.073883, 18833.545319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28180.866000, 20208.174000, 1431.488041, 957.712028, 355.429070, X, Y) && !ellipse(24220.474976, 21882.404404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27700.424000, 18304.512000, 1261.736036, 1261.736036, 0.000000, X, Y) && !ellipse(30012.592000, 19371.352000, 1521.272044, 1521.272044, 0.000000, X, Y) && !ellipse(26544.026000, 18679.604000, 1142.848033, 1142.848033, 0.000000, X, Y)
[Sun Dec  4 18:08:28 2011] Writing fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src151.gif
[Sun Dec  4 21:16:58 2011] Mean detx,y = (245.73, -7986.28) 
[Sun Dec  4 21:16:59 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 21:17:10 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 21:17:11 2011] Setting source spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src151_src_b10.pi.gz
[Sun Dec  4 21:17:11 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src151_bgd.pi.gz
[Mon Dec  5 13:02:45 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec  5 13:02:45 2011] rmf not generated due to insufficient counts
[Mon Dec  5 14:00:27 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:27 2011] Error reading totcts from fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src151_src_b10.pi.gz
[Mon Dec  5 14:00:31 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:31 2011] Using photon index=1.80, rate=0.0154, arf fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src151.arf
[Mon Dec  5 14:00:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:31 2011] Updating source flux to 2.9e-13
[Mon Dec  5 14:06:10 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting