[Tue Nov 29 11:14:25 2011] Detection parameters:
  Position = (353.1, 246.0) = 18 23 26.84 -30 26 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 396.6 +/- 35.1
  Background counts = 299.5
  Rate = 0.02 +/- 0.001

[Tue Nov 29 11:14:26 2011] Off-axis axis estimate = 5.49'
[Tue Nov 29 20:53:47 2011] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 20:53:47 2011] Initial guess for spatial extent in simple fitting = 9.17"
[Tue Nov 29 20:53:47 2011] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.323
[Tue Nov 29 20:53:47 2011] Giving source the simple spatial ID 81 for pass 0, mean size = 9.17"
[Sat Dec  3 11:35:52 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src81.ximg exists
[Sat Dec  3 11:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src81.csv
[Sat Dec  3 11:35:52 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src81_1.ximg exists
[Sat Dec  3 11:35:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src81.csv
[Sat Dec  3 11:35:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sat Dec  3 11:35:54 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sat Dec  3 11:35:54 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Sat Dec  3 11:36:38 2011] Spatial fit model total counts = 4875.930000, observed total counts = 5024.000000
[Sat Dec  3 11:36:38 2011] Offset between fit and detection position for source 136 = 2.252018 pixels
[Sat Dec  3 11:36:38 2011] 4724.260000 total counts/ 2868.000000 bgd. counts: snr = 34.661650
Spatial fit parameters:
  Offset between fit and detection position for source 136 = 2.252018 pixels
  Position = (354.4, 244.2) = 18 23 26.40 -30 26 52.7
  Extent = 18.3 (18.3-36.7)", rotation angle = 0
  Source counts = 1856.3 +/- 68.7
  Background counts = 2868.0
  Rate = 0.06 +/- 0.002
[Sat Dec  3 11:36:38 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:38 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 11:36:38 2011] Source does appear to be extended
[Sat Dec  3 11:36:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:38 2011] Source is confused with source 127
[Sat Dec  3 16:39:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:39:21 2011] Initial guess for spatial extent in simple fitting = 18.34"
[Sat Dec  3 16:39:21 2011] source mask rpix=4.2, npix_max = 89, mask sum = 54, frac = 0.607
[Sat Dec  3 16:39:21 2011] Giving source the simple spatial ID 73 for pass 1, mean size = 18.34"
[Sun Dec  4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src73.ximg exists
[Sun Dec  4 14:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src73.csv
[Sun Dec  4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src73_1.ximg exists
[Sun Dec  4 14:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src73.csv
[Sun Dec  4 14:44:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 14:44:05 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Sun Dec  4 14:44:05 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Sun Dec  4 14:44:05 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Sun Dec  4 14:44:32 2011] Spatial fit model total counts = 7042.460000, observed total counts = 7041.000000
[Sun Dec  4 14:44:32 2011] Offset between fit and detection position for source 136 = 0.368744 pixels
[Sun Dec  4 14:44:32 2011] Warning, changing simple spatial fit ID from 73 to 37
[Sun Dec  4 14:44:32 2011] 5039.603600 total counts/ 5012.200000 bgd. counts: snr = 0.387073
Spatial fit parameters:
  Offset between fit and detection position for source 136 = 0.368744 pixels
  Position = (354.4, 244.6) = 18 23 26.38 -30 26 51.1
  Extent = 3.1 (2.3-6.2)", rotation angle = 0
  Source counts = 27.4 +/- 71.0
  Background counts = 5012.2
  Rate = 0.0009 +/- 0.002
  Deleting source due to low Poisson probability