[Tue Nov 29 11:14:24 2011] Detection parameters: Position = (340.0, 263.1) = 18 23 31.23 -30 25 30.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1157.6 +/- 54.4 Background counts = 396.8 Rate = 0.04 +/- 0.002 [Tue Nov 29 11:14:26 2011] Off-axis axis estimate = 3.96' [Tue Nov 29 20:53:47 2011] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting [Tue Nov 29 20:53:47 2011] Initial guess for spatial extent in simple fitting = 8.41" [Tue Nov 29 20:53:47 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.845 [Tue Nov 29 20:53:47 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 8.41" [Sat Dec 3 11:35:51 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src39.ximg exists [Sat Dec 3 11:35:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src39.csv [Sat Dec 3 11:35:51 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src39_1.ximg exists [Sat Dec 3 11:35:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src39.csv [Sat Dec 3 11:35:51 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src39_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Dec 3 11:35:53 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists [Sat Dec 3 11:35:53 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists [Sat Dec 3 11:35:53 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly [Sat Dec 3 11:36:38 2011] Warning, spatial fit 39 centroid is now closest to src. 133 [Sat Dec 3 11:36:38 2011] Spatial fit model total counts = 6973.010000, observed total counts = 6970.000000 [Sat Dec 3 11:36:38 2011] Offset between fit and detection position for source 132 = 5.639841 pixels [Sat Dec 3 11:36:38 2011] Warning, changing simple spatial fit ID from 39 to 64 [Sat Dec 3 11:36:38 2011] 7059.851000 total counts/ 6756.210000 bgd. counts: snr = 3.694102 Spatial fit parameters: Offset between fit and detection position for source 132 = 5.639841 pixels Position = (342.5, 258.0) = 18 23 30.39 -30 25 52.6 Extent = 13.0 (8.8-17.8)", rotation angle = 0 Source counts = 303.6 +/- 84.0 Background counts = 6756.2 Rate = 0.009 +/- 0.003 [Sat Dec 3 11:36:38 2011] Vigneting correction estimate = 1.000000 [Sat Dec 3 11:36:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Dec 3 11:36:38 2011] Assessing source extent using major axis lower bound [Sat Dec 3 11:36:38 2011] Source does appear to be extended [Sat Dec 3 11:36:38 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Dec 3 16:39:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Dec 3 16:39:21 2011] Initial guess for spatial extent in simple fitting = 13.03" [Sat Dec 3 16:39:21 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002 [Sat Dec 3 16:39:21 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 13.03" [Sun Dec 4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src35.ximg exists [Sun Dec 4 14:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src35.csv [Sun Dec 4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src35_1.ximg exists [Sun Dec 4 14:44:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src35.csv [Sun Dec 4 14:44:03 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Dec 4 14:44:04 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Sun Dec 4 14:44:04 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Sun Dec 4 14:44:04 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Sun Dec 4 14:44:32 2011] Warning, spatial fit 35 centroid is now closest to src. 38 [Sun Dec 4 14:44:32 2011] Vigneting correction estimate = 1.000000 [Sun Dec 4 14:44:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 4 14:44:32 2011] Assessing source extent using major axis lower bound [Sun Dec 4 14:44:32 2011] Source does appear to be extended [Sun Dec 4 14:44:32 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 4 14:44:32 2011] Source is confused with source 127 [Sun Dec 4 18:08:26 2011] XMMSAS src. selection expression = ellipse(29748.806000, 22401.362000, 781.944023, 781.944023, 0.000000, X, Y) [Sun Dec 4 18:08:26 2011] Writing source region out to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src132_src.reg [Sun Dec 4 18:08:26 2011] Extracting stamp from image fullrun_mos2_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (298, 213) - (387, 303) [Sun Dec 4 18:08:26 2011] XMMSAS bgd. selection expression = annulus(29748.806000, 22401.362000, 1303.240038, 2606.480075, X, Y) && !ellipse(27055.898200, 26965.108800, 3586.512103, 3586.512103, 230.545000, X, Y) && !ellipse(26552.129000, 27198.929480, 3586.512103, 3586.512103, 0.000000, X, Y) && !ellipse(26838.358000, 27821.134000, 7173.024206, 7173.024206, 0.000000, X, Y) && !ellipse(26451.314000, 27641.260000, 3363.576097, 1691.212849, 165.373000, X, Y) && !ellipse(27861.506580, 27298.322000, 3533.832102, 3533.832102, 0.000000, X, Y) && !ellipse(27804.678000, 27738.298000, 3685.176106, 3685.176106, 0.000000, X, Y) && !ellipse(27562.734000, 26514.434000, 3504.024101, 3504.024101, 41.843000, X, Y) && !ellipse(27999.834839, 26089.257172, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28017.782600, 28521.314000, 3802.992109, 3802.992109, 0.300312, X, Y) && !ellipse(29273.810000, 25904.724000, 977.968028, 977.968028, 0.000000, X, Y) && !ellipse(25494.948000, 27579.588000, 3499.800101, 3499.800101, 0.000000, X, Y) && !ellipse(25646.894000, 28424.832000, 3675.456106, 3675.456106, 0.000000, X, Y) && !ellipse(27175.371600, 23756.154000, 4345.896125, 4345.896125, 0.000000, X, Y) && !ellipse(28647.430000, 25112.288000, 8108.688233, 2442.840070, 50.565000, X, Y) && !ellipse(27107.605160, 21680.548000, 3926.112113, 3926.112113, 0.000000, X, Y) && !ellipse(27080.114780, 21284.769800, 697.228820, 697.228820, 0.000000, X, Y) && !ellipse(26475.133820, 23620.013550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26563.198486, 23007.437225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29693.576000, 24001.792000, 1351.448039, 1351.448039, 0.000000, X, Y) && !ellipse(30231.606000, 25658.408000, 4036.032116, 4036.032116, 0.000000, X, Y) && !ellipse(28236.034000, 22648.288000, 1334.248038, 1334.248038, 0.000000, X, Y) && !ellipse(28662.908000, 21760.192000, 1249.904036, 1249.904036, 0.000000, X, Y) && !ellipse(28512.770569, 22136.853119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31188.396000, 22306.806000, 3030.704087, 769.643222, 246.761000, X, Y) && !ellipse(31467.330000, 21939.120000, 1304.912038, 1304.912038, 0.000000, X, Y) && !ellipse(31737.502400, 23495.216000, 1431.672041, 1431.672041, 0.000000, X, Y) && !ellipse(32195.048381, 24864.028460, 1463.144042, 1161.821803, 41.819449, X, Y) && !ellipse(32027.180000, 23252.240000, 1515.352044, 1515.352044, 0.000000, X, Y) && !ellipse(30159.539215, 21711.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.420000, 20372.382000, 1191.880034, 1191.880034, 0.000000, X, Y) && !ellipse(29162.230000, 31276.350000, 8284.704238, 8284.704238, 0.000000, X, Y) && !ellipse(32312.560883, 23706.113495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32572.437805, 22915.578522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26847.822937, 19526.936752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.448517, 19543.525375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.429840, 19008.964432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29374.994000, 20326.847200, 1454.008042, 845.800024, 4.888210, X, Y) && !ellipse(29576.431400, 19994.370000, 1527.384044, 249.691207, 75.959000, X, Y) && !ellipse(32893.546000, 22531.190000, 1515.352044, 1515.352044, 0.000000, X, Y) && !ellipse(28180.866000, 20208.174000, 1431.488041, 957.712028, 355.429070, X, Y) && !ellipse(30012.592000, 19371.352000, 1521.272044, 1521.272044, 0.000000, X, Y) && !ellipse(33422.484000, 21894.274000, 1572.328045, 1572.328045, 0.000000, X, Y) && !ellipse(26544.026000, 18679.604000, 1142.848033, 1142.848033, 0.000000, X, Y) && !ellipse(30551.597600, 20150.340000, 1218.080035, 1218.080035, 0.000000, X, Y) [Sun Dec 4 18:08:26 2011] Writing fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src132.gif [Sun Dec 4 20:30:54 2011] Mean detx,y = (-2664.75, -5056.29) [Sun Dec 4 20:30:55 2011] Setting backscal keywords in source and bgd. spectrum [Sun Dec 4 20:31:08 2011] Binned source spectrum to 10 counts/bin [Sun Dec 4 20:31:08 2011] Setting source spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src132_src_b10.pi.gz [Sun Dec 4 20:31:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src132_bgd.pi.gz [Mon Dec 5 14:00:25 2011] Updating aperture counts using extracted products [Mon Dec 5 14:00:25 2011] Error reading totcts from fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src132_src_b10.pi.gz [Mon Dec 5 14:00:30 2011] Calculating source flux in energy range 0.30-8.00 [Mon Dec 5 14:00:30 2011] Using photon index=1.80, rate=0.00949, arf fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src132.arf [Mon Dec 5 14:00:30 2011] Assuming count rate is from the 0.30-10.00 bandpass [Mon Dec 5 14:00:30 2011] Updating source flux to 1.3e-13 [Mon Dec 5 14:06:10 2011] Flag c found in src. 132 procflags, skipping spectral fitting