[Tue Nov 29 11:14:22 2011] Detection parameters:
  Position = (374.3, 311.8) = 18 23 19.72 -30 21 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 896.2 +/- 48.6
  Background counts = 347.9
  Rate = 0.03 +/- 0.002

[Tue Nov 29 11:14:26 2011] Off-axis axis estimate = 5.58'
[Tue Nov 29 20:53:47 2011] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 20:53:47 2011] Initial guess for spatial extent in simple fitting = 9.22"
[Tue Nov 29 20:53:47 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.911
[Tue Nov 29 20:53:47 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 9.22"
[Sat Dec  3 11:35:51 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src43.ximg exists
[Sat Dec  3 11:35:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src43.csv
[Sat Dec  3 11:35:51 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src43_1.ximg exists
[Sat Dec  3 11:35:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src43.csv
[Sat Dec  3 11:35:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 11:35:53 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sat Dec  3 11:35:53 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sat Dec  3 11:35:53 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sat Dec  3 11:36:38 2011] Spatial fit model total counts = 8863.640000, observed total counts = 8851.000000
[Sat Dec  3 11:36:38 2011] Offset between fit and detection position for source 103 = 8.610768 pixels
[Sat Dec  3 11:36:38 2011] 8575.494000 total counts/ 7619.130000 bgd. counts: snr = 10.956467
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 8.610768 pixels
  Position = (366.1, 309.1) = 18 23 22.47 -30 22 10.6
  Extent = 18.4 (18.4-36.9)", rotation angle = 0
  Source counts = 956.4 +/- 92.6
  Background counts = 7619.1
  Rate = 0.03 +/- 0.003
[Sat Dec  3 11:36:38 2011] Spatial fit model total counts = 9980.010000, observed total counts = 9967.000000
[Sat Dec  3 11:36:38 2011] Offset between fit and detection position for source 103 = 0.801681 pixels
[Sat Dec  3 11:36:38 2011] Warning, changing simple spatial fit ID from 43 to 56
[Sat Dec  3 11:36:38 2011] 9837.162000 total counts/ 9580.470000 bgd. counts: snr = 2.622521
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 0.801681 pixels
  Position = (366.6, 309.7) = 18 23 22.31 -30 22 7.8
  Extent = 9.6 (5.6-14.5)", rotation angle = 0
  Source counts = 256.7 +/- 99.2
  Background counts = 9580.5
  Rate = 0.008 +/- 0.003
[Sat Dec  3 11:36:38 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:38 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 11:36:38 2011] Source does appear to be extended
[Sat Dec  3 11:36:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 16:39:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec  3 16:39:21 2011] Initial guess for spatial extent in simple fitting = 9.59"
[Sat Dec  3 16:39:21 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.855
[Sat Dec  3 16:39:21 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 9.59"
[Sun Dec  4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src38.ximg exists
[Sun Dec  4 14:44:03 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Dec  4 14:44:03 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_src38 appears to have run properly
[Sun Dec  4 14:44:04 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Dec  4 14:44:04 2011] fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Dec  4 14:44:04 2011] Fit fullrun_mos2_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Sun Dec  4 14:44:32 2011] Warning, spatial fit 38 centroid is now closest to src. 101
[Sun Dec  4 14:44:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:32 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 14:44:32 2011] Source does appear to be extended
[Sun Dec  4 14:44:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 18:08:26 2011] XMMSAS src. selection expression = ellipse(31842.256000, 26895.636000, 575.274017, 575.274017, 0.000000, X, Y)
[Sun Dec  4 18:08:26 2011] Writing source region out to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src103_src.reg
[Sun Dec  4 18:08:26 2011] Extracting stamp from image fullrun_mos2_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (333, 277) - (400, 343)
[Sun Dec  4 18:08:26 2011] XMMSAS bgd. selection expression = annulus(31842.256000, 26895.636000, 958.790028, 1917.580055, X, Y) && !ellipse(27055.898200, 26965.108800, 3586.512103, 3586.512103, 230.545000, X, Y) && !ellipse(26552.129000, 27198.929480, 3586.512103, 3586.512103, 0.000000, X, Y) && !ellipse(26838.358000, 27821.134000, 7173.024206, 7173.024206, 0.000000, X, Y) && !ellipse(27861.506580, 27298.322000, 3533.832102, 3533.832102, 0.000000, X, Y) && !ellipse(27804.678000, 27738.298000, 3685.176106, 3685.176106, 0.000000, X, Y) && !ellipse(27562.734000, 26514.434000, 3504.024101, 3504.024101, 41.843000, X, Y) && !ellipse(27999.834839, 26089.257172, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28017.782600, 28521.314000, 3802.992109, 3802.992109, 0.300312, X, Y) && !ellipse(29273.810000, 25904.724000, 977.968028, 977.968028, 0.000000, X, Y) && !ellipse(27175.371600, 23756.154000, 4345.896125, 4345.896125, 0.000000, X, Y) && !ellipse(28647.430000, 25112.288000, 8108.688233, 2442.840070, 50.565000, X, Y) && !ellipse(27173.987600, 31235.128000, 4098.816118, 4098.816118, 0.000000, X, Y) && !ellipse(27107.605160, 21680.548000, 3926.112113, 3926.112113, 0.000000, X, Y) && !ellipse(30050.778595, 27804.437958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29693.576000, 24001.792000, 1351.448039, 1351.448039, 0.000000, X, Y) && !ellipse(30827.374664, 27342.396484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30231.606000, 25658.408000, 4036.032116, 4036.032116, 0.000000, X, Y) && !ellipse(33664.005310, 26611.161591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31188.396000, 22306.806000, 3030.704087, 769.643222, 246.761000, X, Y) && !ellipse(31402.006851, 28684.364549, 1061.896031, 368.103638, 342.362969, X, Y) && !ellipse(31242.104000, 27901.970000, 837.520024, 837.520024, 0.000000, X, Y) && !ellipse(31006.790924, 29356.236206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32195.048381, 24864.028460, 1463.144042, 1161.821803, 41.819449, X, Y) && !ellipse(33197.704000, 26882.814000, 1559.056045, 734.560021, 90.000000, X, Y) && !ellipse(32849.250000, 28066.649200, 1485.768043, 1485.768043, 0.000000, X, Y) && !ellipse(29162.230000, 31276.350000, 8284.704238, 8284.704238, 0.000000, X, Y) && !ellipse(33792.402527, 27043.495941, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 18:08:26 2011] Writing fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src103.gif
[Sun Dec  4 20:34:53 2011] Mean detx,y = (-4686.27, -635.98) 
[Sun Dec  4 20:34:54 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 20:35:04 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 20:35:04 2011] Setting source spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Sun Dec  4 20:35:04 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Mon Dec  5 14:00:25 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:25 2011] Error reading totcts from fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Mon Dec  5 14:00:30 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:30 2011] Using photon index=1.80, rate=0.00802, arf fullrun_mos2_xmm0084110201_pi300-10000_pass1_cl_src103.arf
[Mon Dec  5 14:00:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:30 2011] Updating source flux to 1.2e-13