[Tue Nov 29 11:11:59 2011] Detection parameters:
  Position = (281.7, 234.6) = 18 23 50.85 -30 27 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.8 +/- 38.3
  Background counts = 343.3
  Rate = 0.01 +/- 0.002

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 4.79'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 8.82"
[Tue Nov 29 11:26:55 2011] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.587
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 89 for pass 0, mean size = 8.82"
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src89.ximg exists
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src89_1.ximg exists
[Tue Nov 29 20:53:43 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src89 appears to have run properly
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Tue Nov 29 20:53:46 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Sat Dec  3 11:36:18 2011] Spatial fit model total counts = 2739.080000, observed total counts = 2819.000000
[Sat Dec  3 11:36:18 2011] Offset between fit and detection position for source 96 = 3.073479 pixels
[Sat Dec  3 11:36:18 2011] 2285.384000 total counts/ 925.074000 bgd. counts: snr = 44.724928
Spatial fit parameters:
  Offset between fit and detection position for source 96 = 3.073479 pixels
  Position = (284.7, 235.1) = 18 23 49.83 -30 27 32.6
  Extent = 14.0 (12.9-14.6)", rotation angle = 0
  Source counts = 1360.3 +/- 47.8
  Background counts = 925.1
  Rate = 0.04 +/- 0.001
[Sat Dec  3 11:36:18 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:18 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 11:36:18 2011] Source does appear to be extended
[Sat Dec  3 11:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec  3 11:36:59 2011] Initial guess for spatial extent in simple fitting = 14.03"
[Sat Dec  3 11:36:59 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.882
[Sat Dec  3 11:36:59 2011] Giving source the simple spatial ID 83 for pass 1, mean size = 14.03"
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src83.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src83.csv
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src83_1.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src83.csv
[Sat Dec  3 16:39:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:39:21 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Sat Dec  3 16:39:21 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Sat Dec  3 16:39:21 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Sun Dec  4 14:44:18 2011] Warning, spatial fit 83 centroid is now closest to src. 94
[Sun Dec  4 14:44:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:18 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 14:44:18 2011] Source does appear to be extended
[Sun Dec  4 14:44:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 14:44:52 2011] Counts = 1360.310000, rescaling region sizes by 2.000000
[Sun Dec  4 14:44:52 2011] XMMSAS src. selection expression = ellipse(24720.410000, 20402.247440, 1683.960048, 1683.960048, 0.000000, X, Y)
[Sun Dec  4 14:44:52 2011] Writing source region out to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src96_src.reg
[Sun Dec  4 14:44:52 2011] Extracting stamp from image fullrun_mos1_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (188, 138) - (381, 332)
[Sun Dec  4 14:44:52 2011] XMMSAS bgd. selection expression = annulus(24720.410000, 20402.247440, 5613.200162, 11226.400323, X, Y) && !ellipse(23545.933000, 20364.222000, 1446.520042, 1446.520042, 0.000000, X, Y) && !ellipse(30270.970795, 19523.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20604.362244, 24131.000488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20430.290558, 31036.646729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26150.886380, 20534.225600, 1586.872046, 566.747216, 357.616590, X, Y) && !ellipse(17421.888809, 23200.125977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27149.433200, 14214.524000, 968.640028, 968.640028, 0.000000, X, Y) && !ellipse(20526.998672, 26421.218140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.866966, 14547.063748, 2141.960062, 421.998095, 88.653389, X, Y) && !ellipse(27276.432281, 11169.170029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35082.568878, 31310.778503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33904.415558, 30675.055634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34236.802000, 29890.280400, 1673.328048, 1673.328048, 0.000000, X, Y) && !ellipse(34096.015747, 29182.283997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34159.741760, 28487.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33927.097473, 27909.059387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.356000, 27131.676000, 1596.520046, 1596.520046, 0.000000, X, Y) && !ellipse(34316.702000, 25950.911800, 1614.896046, 518.309615, 96.329000, X, Y) && !ellipse(34327.218000, 25674.563400, 1614.896046, 555.145616, 91.677400, X, Y) && !ellipse(27164.767059, 12132.982834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.686000, 20395.666800, 1495.080043, 1495.080043, 0.000000, X, Y) && !ellipse(27010.831800, 20403.851500, 1405.704040, 1405.704040, 0.000000, X, Y) && !ellipse(29046.798000, 20499.351480, 1442.664042, 1442.664042, 0.000000, X, Y) && !ellipse(27099.781200, 19524.820800, 1184.056034, 1184.056034, 0.000000, X, Y) && !ellipse(27150.575400, 18902.980000, 2368.112068, 2368.112068, 0.000000, X, Y) && !ellipse(27105.214752, 18309.745209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27161.366000, 17563.202400, 711.216020, 711.216020, 0.000000, X, Y) && !ellipse(27099.686000, 17031.123200, 1628.072047, 277.632008, 90.692058, X, Y) && !ellipse(27079.123980, 16870.828000, 778.207222, 778.207222, 0.000000, X, Y) && !ellipse(27132.673065, 15702.409531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.005310, 13007.812332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33847.173126, 32473.620270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34945.914520, 31952.268097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34069.229156, 31878.906982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33914.082520, 31179.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35369.922200, 29792.457600, 770.042422, 770.042422, 0.000000, X, Y) && !ellipse(35188.188599, 28668.891602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19922.945200, 28905.392000, 1471.185393, 1471.185393, 0.000000, X, Y) && !ellipse(35064.267761, 28230.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36174.731110, 28318.252502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34743.054352, 27096.657593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20053.109800, 26692.180000, 1426.290599, 1426.290599, 0.000000, X, Y) && !ellipse(34627.532000, 26579.356000, 1619.808047, 1619.808047, 0.000000, X, Y) && !ellipse(20357.277252, 25758.339630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34708.005310, 25710.673889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34708.061066, 24734.825836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34311.494000, 24174.434000, 1281.320037, 1281.320037, 0.000000, X, Y) && !ellipse(34737.924835, 23707.629517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30743.725311, 20455.834595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32420.542000, 20408.310580, 1586.048046, 1586.048046, 0.000000, X, Y) && !ellipse(25958.712000, 20394.146200, 1407.376040, 1407.376040, 0.000000, X, Y) && !ellipse(23688.885010, 20054.984909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27990.141327, 20358.361832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21703.136248, 19708.434200, 488.389614, 488.389614, 0.000000, X, Y) && !ellipse(35645.100555, 17180.196182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.481200, 16953.283800, 452.105613, 452.105613, 0.000000, X, Y) && !ellipse(27182.980560, 10653.446518, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 14:44:52 2011] Writing fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src96.gif
[Sun Dec  4 15:58:31 2011] Mean detx,y = (-7369.62, -2457.96) 
[Sun Dec  4 15:58:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 16:00:13 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 16:00:13 2011] Setting source spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sun Dec  4 16:00:13 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Mon Dec  5 14:00:20 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:20 2011] Error reading totcts from fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Mon Dec  5 14:00:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:24 2011] Using photon index=1.80, rate=0.0352, arf fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src96.arf
[Mon Dec  5 14:00:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:24 2011] Updating source flux to 5.7e-13