[Tue Nov 29 11:11:59 2011] Detection parameters:
  Position = (272.8, 231.1) = 18 23 53.82 -30 27 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.4 +/- 26.8
  Background counts = 311.3
  Rate = 0.006 +/- 0.001

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 5.22'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 9.04"
[Tue Nov 29 11:26:55 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.128
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 9.04"
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src87.ximg exists
[Tue Nov 29 20:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src87.csv
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src87_1.ximg exists
[Tue Nov 29 20:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src87.csv
[Tue Nov 29 20:53:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Tue Nov 29 20:53:46 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Sat Dec  3 11:36:18 2011] Warning, spatial fit 87 centroid is now closest to src. 1
[Sat Dec  3 11:36:18 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:18 2011] Assessing source extent using major
[Sat Dec  3 11:36:18 2011] Source does appear to be extended
[Sat Dec  3 11:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:18 2011] Source is confused with source 1
[Sat Dec  3 11:36:59 2011] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 11:36:59 2011] Initial guess for spatial extent in simple fitting = 9.04"
[Sat Dec  3 11:36:59 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.128
[Sat Dec  3 11:36:59 2011] Giving source the simple spatial ID 81 for pass 1, mean size = 9.04"
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src81.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src81.csv
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src81_1.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src81.csv
[Sat Dec  3 16:39:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:39:21 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Sat Dec  3 16:39:21 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Sat Dec  3 16:39:21 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Sun Dec  4 14:44:18 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 10.906611 pixels away
[Sun Dec  4 14:44:18 2011] Warning, spatial fit 81 centroid is now closest to src. 1
[Sun Dec  4 14:44:18 2011] Source 94 is offset by 1.247414 and 8.478447 pixels which is larger than
2 X fitted extent = 1.612989 x 1.612989, not incorporating fit results
[Sun Dec  4 14:44:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:18 2011] Assessing source extent using major
[Sun Dec  4 14:44:18 2011] Source does appear to be extended
[Sun Dec  4 14:44:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 14:44:51 2011] XMMSAS src. selection expression = ellipse(23688.885010, 20054.984909, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 14:44:51 2011] Writing source region out to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src94_src.reg
[Sun Dec  4 14:44:51 2011] Extracting stamp from image fullrun_mos1_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (235, 194) - (310, 269)
[Sun Dec  4 14:44:51 2011] XMMSAS bgd. selection expression = annulus(23688.885010, 20054.984909, 1087.500000, 2175.000000, X, Y) && !ellipse(23545.933000, 20364.222000, 1446.520042, 1446.520042, 0.000000, X, Y) && !ellipse(26150.886380, 20534.225600, 1586.872046, 566.747216, 357.616590, X, Y) && !ellipse(27010.831800, 20403.851500, 1405.704040, 1405.704040, 0.000000, X, Y) && !ellipse(27150.575400, 18902.980000, 2368.112068, 2368.112068, 0.000000, X, Y) && !ellipse(27099.686000, 17031.123200, 1628.072047, 277.632008, 90.692058, X, Y) && !ellipse(25958.712000, 20394.146200, 1407.376040, 1407.376040, 0.000000, X, Y) && !ellipse(24720.410000, 20402.247440, 1122.640032, 1122.640032, 0.000000, X, Y) && !ellipse(21703.136248, 19708.434200, 488.389614, 488.389614, 0.000000, X, Y)
[Sun Dec  4 14:44:51 2011] Writing fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src94.gif
[Sun Dec  4 15:58:03 2011] Mean detx,y = (-7236.15, -3696.42) 
[Sun Dec  4 15:58:04 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 15:58:10 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 15:58:11 2011] Setting source spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Sun Dec  4 15:58:11 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src94_bgd.pi.gz
[Sun Dec  4 18:01:51 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec  4 18:01:51 2011] rmf not generated due to insufficient counts
[Mon Dec  5 14:00:20 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:20 2011] Error reading totcts from fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Mon Dec  5 14:00:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:24 2011] Using photon index=1.80, rate=0.00646, arf fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src94.arf
[Mon Dec  5 14:00:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:24 2011] Updating source flux to 1.2e-13
[Mon Dec  5 14:00:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting