[Tue Nov 29 11:11:58 2011] Detection parameters:
  Position = (341.6, 234.6) = 18 23 30.69 -30 27 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 266.8 +/- 31.5
  Background counts = 337.6
  Rate = 0.01 +/- 0.001

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 5.59'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 9.22"
[Tue Nov 29 11:26:55 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.910
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 86 for pass 0, mean size = 9.22"
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src86.ximg exists
[Tue Nov 29 20:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src86.csv
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src86_1.ximg exists
[Tue Nov 29 20:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src86.csv
[Tue Nov 29 20:53:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Tue Nov 29 20:53:46 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src86 appears to have run properly
[Sat Dec  3 11:36:18 2011] Spatial fit model total counts = 3377.040000, observed total counts = 3427.000000
[Sat Dec  3 11:36:18 2011] Offset between fit and detection position for source 93 = 7.609199 pixels
[Sat Dec  3 11:36:18 2011] Warning, changing simple spatial fit ID from 86 to 38
[Sat Dec  3 11:36:18 2011] 2761.000029 total counts/ 2761.000000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 7.609199 pixels
  Position = (338.3, 227.7) = 18 23 31.81 -30 28 4.5
  Extent = 18.0 (2.3-33.8)", rotation angle = 0
  Source counts = 0.0 +/- 52.5
  Background counts = 2761.0
  Rate = 8e-10 +/- 0.001
  Deleting source due to low Poisson probability