[Tue Nov 29 11:11:58 2011] Detection parameters:
  Position = (353.9, 235.7) = 18 23 26.54 -30 27 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.5 +/- 23.8
  Background counts = 321.8
  Rate = 0.008 +/- 0.001

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 6.07'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 9.47"
[Tue Nov 29 11:26:55 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.047
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 83 for pass 0, mean size = 9.47"
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src83.ximg exists
[Tue Nov 29 20:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src83.csv
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src83_1.ximg exists
[Tue Nov 29 20:53:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src83.csv
[Tue Nov 29 20:53:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Tue Nov 29 20:53:46 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Sat Dec  3 11:36:18 2011] Warning, spatial fit 83 centroid is now closest to src. 91
[Sat Dec  3 11:36:18 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:18 2011] Assessing source extent using major
[Sat Dec  3 11:36:18 2011] Source does appear to be extended
[Sat Dec  3 11:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:18 2011] Source is confused with source 41
[Sat Dec  3 11:36:59 2011] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 11:36:59 2011] Initial guess for spatial extent in simple fitting = 9.47"
[Sat Dec  3 11:36:59 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.047
[Sat Dec  3 11:36:59 2011] Giving source the simple spatial ID 78 for pass 1, mean size = 9.47"
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src78.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src78.csv
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src78_1.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src78.csv
[Sat Dec  3 16:39:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:39:21 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Sat Dec  3 16:39:21 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Sat Dec  3 16:39:21 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src78 appears to have run properly
[Sun Dec  4 14:44:18 2011] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 90 at 11.462482 pixels away
[Sun Dec  4 14:44:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:18 2011] Assessing source extent using major
[Sun Dec  4 14:44:18 2011] Source does appear to be extended
[Sun Dec  4 14:44:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 14:44:51 2011] XMMSAS src. selection expression = ellipse(30743.725311, 20455.834595, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 14:44:51 2011] Writing source region out to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src90_src.reg
[Sun Dec  4 14:44:51 2011] Extracting stamp from image fullrun_mos1_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (316, 198) - (391, 273)
[Sun Dec  4 14:44:51 2011] XMMSAS bgd. selection expression = annulus(30743.725311, 20455.834595, 1087.500000, 2175.000000, X, Y) && !ellipse(30270.970795, 19523.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.686000, 20395.666800, 1495.080043, 1495.080043, 0.000000, X, Y) && !ellipse(29046.798000, 20499.351480, 1442.664042, 1442.664042, 0.000000, X, Y) && !ellipse(27150.575400, 18902.980000, 2368.112068, 2368.112068, 0.000000, X, Y) && !ellipse(27099.686000, 17031.123200, 1628.072047, 277.632008, 90.692058, X, Y) && !ellipse(32420.542000, 20408.310580, 1586.048046, 1586.048046, 0.000000, X, Y) && !ellipse(27990.141327, 20358.361832, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 14:44:51 2011] Writing fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src90.gif
[Sun Dec  4 15:51:24 2011] Mean detx,y = (-6990.10, 3422.59) 
[Sun Dec  4 15:51:25 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 15:51:31 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 15:51:31 2011] Setting source spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Sun Dec  4 15:51:31 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Sun Dec  4 17:54:42 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec  4 17:54:42 2011] rmf not generated due to insufficient counts
[Mon Dec  5 14:00:20 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:20 2011] Error reading totcts from fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Mon Dec  5 14:00:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:24 2011] Using photon index=1.80, rate=0.00782, arf fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src90.arf
[Mon Dec  5 14:00:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:24 2011] Updating source flux to 1.4e-13
[Mon Dec  5 14:00:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting