[Tue Nov 29 11:11:57 2011] Detection parameters:
  Position = (401.5, 337.1) = 18 23 10.58 -30 20 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.3 +/- 26.1
  Background counts = 285.7
  Rate = 0.01 +/- 0.001

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 7.98'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 10.42"
[Tue Nov 29 11:26:55 2011] source mask rpix=2.4, npix_max = 33, mask sum = 21, frac = 0.626
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 69 for pass 0, mean size = 10.42"
[Tue Nov 29 20:53:42 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src69.ximg exists
[Tue Nov 29 20:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src69.csv
[Tue Nov 29 20:53:42 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src69_1.ximg exists
[Tue Nov 29 20:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src69.csv
[Tue Nov 29 20:53:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Tue Nov 29 20:53:46 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Tue Nov 29 20:53:46 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Sat Dec  3 11:36:18 2011] Spatial fit model total counts = 4046.170000, observed total counts = 4083.000000
[Sat Dec  3 11:36:18 2011] Offset between fit and detection position for source 75 = 1.351196 pixels
[Sat Dec  3 11:36:18 2011] Warning, changing simple spatial fit ID from 69 to 30
[Sat Dec  3 11:36:18 2011] 3780.750000 total counts/ 3780.750000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 1.351196 pixels
  Position = (402.2, 338.2) = 18 23 10.34 -30 20 3.6
  Extent = 2.5 (2.5-37.6)", rotation angle = 0
  Source counts = 0.0 +/- 61.5
  Background counts = 3780.8
  Rate = 9e-18 +/- 0.002
  Deleting source due to low Poisson probability