[Tue Nov 29 11:11:57 2011] Detection parameters:
  Position = (401.5, 362.9) = 18 23 10.59 -30 18 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.3 +/- 33.1
  Background counts = 272.1
  Rate = 0.01 +/- 0.002

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 8.81'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 10.84"
[Tue Nov 29 11:26:55 2011] source mask rpix=2.5, npix_max = 35, mask sum = 24, frac = 0.671
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 10.84"
[Tue Nov 29 20:53:42 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src65.ximg exists
[Tue Nov 29 20:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src65.csv
[Tue Nov 29 20:53:42 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src65_1.ximg exists
[Tue Nov 29 20:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src65.csv
[Tue Nov 29 20:53:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 20:53:45 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Tue Nov 29 20:53:45 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Tue Nov 29 20:53:45 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sat Dec  3 11:36:18 2011] Source 71 is offset by 3.487111 and 5.323629 pixels which is larger than
2 X fitted extent = 3.446520 x 3.446520, not incorporating fit results
[Sat Dec  3 11:36:18 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:18 2011] Assessing source extent using major
[Sat Dec  3 11:36:18 2011] Source does appear to be extended
[Sat Dec  3 11:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:18 2011] Source is confused with source 30
[Sat Dec  3 11:36:59 2011] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 11:36:59 2011] Initial guess for spatial extent in simple fitting = 10.84"
[Sat Dec  3 11:36:59 2011] source mask rpix=2.5, npix_max = 35, mask sum = 24, frac = 0.671
[Sat Dec  3 11:36:59 2011] Giving source the simple spatial ID 63 for pass 1, mean size = 10.84"
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src63.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src63.csv
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src63_1.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src63.csv
[Sat Dec  3 16:39:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:39:20 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sat Dec  3 16:39:20 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sat Dec  3 16:39:20 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sun Dec  4 14:44:18 2011] Spatial fit model total counts = 5435.250000, observed total counts = 5437.000000
[Sun Dec  4 14:44:18 2011] Offset between fit and detection position for source 71 = 5.836945 pixels
[Sun Dec  4 14:44:18 2011] Warning, changing simple spatial fit ID from 63 to 27
[Sun Dec  4 14:44:18 2011] 5110.160000 total counts/ 4291.820000 bgd. counts: snr = 12.491455
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 5.836945 pixels
  Position = (396.6, 359.8) = 18 23 12.24 -30 18 29.8
  Extent = 17.6 (13.2-21.7)", rotation angle = 0
  Source counts = 818.3 +/- 71.5
  Background counts = 4291.8
  Rate = 0.02 +/- 0.002
[Sun Dec  4 14:44:18 2011] Spatial fit model total counts = 3735.590000, observed total counts = 3737.000000
[Sun Dec  4 14:44:18 2011] Offset between fit and detection position for source 71 = 2.830025 pixels
[Sun Dec  4 14:44:18 2011] Warning, changing simple spatial fit ID from 27 to 63
[Sun Dec  4 14:44:18 2011] 3638.513300 total counts/ 3546.610000 bgd. counts: snr = 1.543208
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 2.830025 pixels
  Position = (398.2, 357.4) = 18 23 11.71 -30 18 40.1
  Extent = 7.5 (4.3-21.7)", rotation angle = 0
  Source counts = 91.9 +/- 60.3
  Background counts = 3546.6
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability