[Tue Nov 29 11:11:57 2011] Detection parameters:
  Position = (389.6, 373.8) = 18 23 14.59 -30 17 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.7 +/- 21.9
  Background counts = 269.1
  Rate = 0.004 +/- 0.0006

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 8.58'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 10.72"
[Tue Nov 29 11:26:55 2011] source mask rpix=2.5, npix_max = 35, mask sum = 18, frac = 0.512
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 62 for pass 0, mean size = 10.72"
[Tue Nov 29 20:53:42 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src62.ximg exists
[Tue Nov 29 20:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src62.csv
[Tue Nov 29 20:53:42 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src62_1.ximg exists
[Tue Nov 29 20:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src62.csv
[Tue Nov 29 20:53:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 20:53:45 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Tue Nov 29 20:53:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src62.csv
[Tue Nov 29 20:53:45 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Tue Nov 29 20:53:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src62.csv
[Tue Nov 29 20:53:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 11:36:18 2011] Warning, spatial fit 62 centroid is now closest to src. 67
[Sat Dec  3 11:36:18 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:18 2011] Assessing source extent using major
[Sat Dec  3 11:36:18 2011] Source does appear to be extended
[Sat Dec  3 11:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:18 2011] Source is confused with source 67
[Sat Dec  3 11:36:59 2011] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 11:36:59 2011] Initial guess for spatial extent in simple fitting = 10.72"
[Sat Dec  3 11:36:59 2011] source mask rpix=2.5, npix_max = 35, mask sum = 18, frac = 0.512
[Sat Dec  3 11:36:59 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 10.72"
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src60.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src60.csv
[Sat Dec  3 16:39:19 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src60_1.ximg exists
[Sat Dec  3 16:39:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src60.csv
[Sat Dec  3 16:39:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:39:20 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Sat Dec  3 16:39:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sat Dec  3 16:39:20 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Sat Dec  3 16:39:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Sat Dec  3 16:39:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec  4 14:44:18 2011] Warning, spatial fit 60 centroid is now closest to src. 69
[Sun Dec  4 14:44:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:18 2011] Assessing source extent using major
[Sun Dec  4 14:44:18 2011] Source does appear to be extended
[Sun Dec  4 14:44:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 14:44:50 2011] XMMSAS src. selection expression = ellipse(33847.173126, 32473.620270, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec  4 14:44:50 2011] Writing source region out to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src68_src.reg
[Sun Dec  4 14:44:50 2011] Extracting stamp from image fullrun_mos1_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (352, 336) - (427, 411)
[Sun Dec  4 14:44:50 2011] XMMSAS bgd. selection expression = annulus(33847.173126, 32473.620270, 1087.500000, 2175.000000, X, Y) && !ellipse(33059.330000, 34249.920600, 1044.496030, 1044.496030, 0.000000, X, Y) && !ellipse(35082.568878, 31310.778503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33904.415558, 30675.055634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34236.802000, 29890.280400, 1673.328048, 1673.328048, 0.000000, X, Y) && !ellipse(31617.224640, 35079.435944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32384.769714, 34825.686829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32232.410000, 34312.450000, 1748.104050, 1748.104050, 0.000000, X, Y) && !ellipse(31293.936200, 34268.658400, 1174.952034, 1174.952034, 0.000000, X, Y) && !ellipse(30490.871000, 34238.287600, 1664.000048, 1664.000048, 0.000000, X, Y) && !ellipse(33751.005310, 32927.595764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34945.914520, 31952.268097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34069.229156, 31878.906982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33914.082520, 31179.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35369.922200, 29792.457600, 770.042422, 770.042422, 0.000000, X, Y)
[Sun Dec  4 14:44:50 2011] Writing fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src68.gif
[Sun Dec  4 15:36:34 2011] Mean detx,y = (5103.08, 6802.68) 
[Sun Dec  4 15:36:34 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 15:36:40 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 15:36:40 2011] Setting source spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Dec  4 15:36:40 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sun Dec  4 17:37:19 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec  4 17:37:19 2011] rmf not generated due to insufficient counts
[Mon Dec  5 14:00:19 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:19 2011] Error reading totcts from fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Mon Dec  5 14:00:23 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:23 2011] Using photon index=1.80, rate=0.00408, arf fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src68.arf
[Mon Dec  5 14:00:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:23 2011] Updating source flux to 8e-14
[Mon Dec  5 14:00:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting