[Tue Nov 29 11:11:56 2011] Detection parameters: Position = (306.4, 230.0) = 18 23 42.52 -30 27 53.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 361.3 +/- 32.2 Background counts = 347.4 Rate = 0.02 +/- 0.001 [Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 5.00' [Tue Nov 29 11:26:55 2011] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting [Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 8.93" [Tue Nov 29 11:26:55 2011] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.691 [Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 8.93" [Tue Nov 29 20:53:42 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src39.ximg exists [Tue Nov 29 20:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src39.csv [Tue Nov 29 20:53:42 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src39_1.ximg exists [Tue Nov 29 20:53:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src39.csv [Tue Nov 29 20:53:42 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src39_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Nov 29 20:53:44 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists [Tue Nov 29 20:53:44 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists [Tue Nov 29 20:53:44 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly [Sat Dec 3 11:36:18 2011] Warning, spatial fit 39 centroid is now closest to src. 45 [Sat Dec 3 11:36:18 2011] Spatial fit model total counts = 5976.720000, observed total counts = 5973.000000 [Sat Dec 3 11:36:18 2011] Offset between fit and detection position for source 44 = 3.986042 pixels [Sat Dec 3 11:36:18 2011] Warning, changing simple spatial fit ID from 39 to 41 [Sat Dec 3 11:36:18 2011] 5746.210023 total counts/ 5746.210000 bgd. counts: snr = 0.000000 Spatial fit parameters: Offset between fit and detection position for source 44 = 3.986042 pixels Position = (302.5, 230.5) = 18 23 43.85 -30 27 52.3 Extent = 18.5 (18.5-37.1)", rotation angle = 0 Source counts = 0.0 +/- 75.8 Background counts = 5746.2 Rate = 6e-10 +/- 0.002 Deleting source due to low Poisson probability