[Tue Nov 29 11:11:55 2011] Detection parameters:
  Position = (312.2, 414.0) = 18 23 40.58 -30 14 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 742.8 +/- 42.6
  Background counts = 295.6
  Rate = 0.03 +/- 0.002

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 8.44'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 10.65"
[Tue Nov 29 11:26:55 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 10.65"
[Tue Nov 29 20:53:41 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src21.ximg exists
[Tue Nov 29 20:53:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src21.csv
[Tue Nov 29 20:53:41 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Nov 29 20:53:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src21.csv
[Tue Nov 29 20:53:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 20:53:44 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Nov 29 20:53:44 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Nov 29 20:53:44 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Dec  3 11:36:18 2011] Spatial fit model total counts = 4972.260000, observed total counts = 4976.000000
[Sat Dec  3 11:36:18 2011] Offset between fit and detection position for source 24 = 1.238338 pixels
[Sat Dec  3 11:36:18 2011] Warning, changing simple spatial fit ID from 21 to 20
[Sat Dec  3 11:36:18 2011] 3760.293000 total counts/ 3640.940000 bgd. counts: snr = 1.978001
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.238338 pixels
  Position = (312.0, 415.2) = 18 23 40.65 -30 14 29.0
  Extent = 4.0 (2.8-5.8)", rotation angle = 0
  Source counts = 119.4 +/- 61.3
  Background counts = 3640.9
  Rate = 0.003 +/- 0.002
[Sat Dec  3 11:36:18 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:18 2011] Assessing source extent using major axis lower bound
[Sat Dec  3 11:36:18 2011] Source does appear to be extended
[Sat Dec  3 11:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:18 2011] Source is confused with source 23
[Sat Dec  3 11:36:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec  3 11:36:59 2011] Initial guess for spatial extent in simple fitting = 4.00"
[Sat Dec  3 11:36:59 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.744
[Sat Dec  3 11:36:59 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 4.00"
[Sat Dec  3 16:39:18 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src21.ximg exists
[Sat Dec  3 16:39:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src21.csv
[Sat Dec  3 16:39:18 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Dec  3 16:39:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src21.csv
[Sat Dec  3 16:39:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:39:20 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Dec  3 16:39:20 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Dec  3 16:39:20 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Dec  4 14:44:18 2011] Warning, spatial fit 21 centroid is now closest to src. 23
[Sun Dec  4 14:44:18 2011] Spatial fit model total counts = 7501.330000, observed total counts = 7489.000000
[Sun Dec  4 14:44:18 2011] Offset between fit and detection position for source 24 = 0.260381 pixels
[Sun Dec  4 14:44:18 2011] Warning, changing simple spatial fit ID from 21 to 22
[Sun Dec  4 14:44:18 2011] 6226.000000 total counts/ 4916.210000 bgd. counts: snr = 18.680412
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.260381 pixels
  Position = (311.9, 415.0) = 18 23 40.69 -30 14 30.0
  Extent = 13.4 (11.8-16.7)", rotation angle = 0
  Source counts = 1309.8 +/- 78.9
  Background counts = 4916.2
  Rate = 0.03 +/- 0.002
[Sun Dec  4 14:44:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:18 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 14:44:18 2011] Source does appear to be extended
[Sun Dec  4 14:44:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 14:44:48 2011] Counts = 1309.790000, rescaling region sizes by 2.000000
[Sun Dec  4 14:44:48 2011] XMMSAS src. selection expression = ellipse(27087.747600, 36053.038000, 1607.892046, 1607.892046, 0.000000, X, Y)
[Sun Dec  4 14:44:48 2011] Writing source region out to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src24_src.reg
[Sun Dec  4 14:44:48 2011] Extracting stamp from image fullrun_mos1_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (220, 323) - (404, 507)
[Sun Dec  4 14:44:49 2011] XMMSAS bgd. selection expression = annulus(27087.747600, 36053.038000, 5359.640154, 10719.280308, X, Y) && !ellipse(20430.290558, 31036.646729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25308.562000, 34232.655200, 1412.520041, 1412.520041, 0.000000, X, Y) && !ellipse(27129.699000, 34419.344000, 1404.760040, 1404.760040, 0.000000, X, Y) && !ellipse(27047.417419, 41535.686615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.090424, 40757.725861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27044.313690, 39625.547028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27068.224884, 42060.450500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.188324, 38756.141754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.998672, 26421.218140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.657200, 42453.751600, 2141.960062, 426.497612, 88.539920, X, Y) && !ellipse(27038.764679, 38147.425842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27047.855499, 37540.690582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27022.422200, 43209.010600, 613.216018, 613.216018, 0.000000, X, Y) && !ellipse(27075.733307, 40409.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.082400, 37020.842000, 655.688819, 655.688819, 0.000000, X, Y) && !ellipse(27090.373138, 36662.398926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27098.902160, 35734.261200, 804.920023, 804.920023, 0.000000, X, Y) && !ellipse(33059.330000, 34249.920600, 1044.496030, 1044.496030, 0.000000, X, Y) && !ellipse(28740.917200, 34289.188000, 1200.792035, 1200.792035, 0.000000, X, Y) && !ellipse(35082.568878, 31310.778503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33904.415558, 30675.055634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34236.802000, 29890.280400, 1673.328048, 1673.328048, 0.000000, X, Y) && !ellipse(34096.015747, 29182.283997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34159.741760, 28487.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33927.097473, 27909.059387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.356000, 27131.676000, 1596.520046, 1596.520046, 0.000000, X, Y) && !ellipse(34316.702000, 25950.911800, 1614.896046, 518.309615, 96.329000, X, Y) && !ellipse(34327.218000, 25674.563400, 1614.896046, 555.145616, 91.677400, X, Y) && !ellipse(27036.338000, 43986.176200, 948.808027, 948.808027, 0.000000, X, Y) && !ellipse(26456.137085, 44021.314423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33063.668671, 40324.451630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19024.238815, 40081.734161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29045.480957, 38824.591064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28308.848389, 34997.719452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31617.224640, 35079.435944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.850739, 34899.897552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28595.734000, 35342.832000, 1190.096034, 1190.096034, 0.000000, X, Y) && !ellipse(32384.769714, 34825.686829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32232.410000, 34312.450000, 1748.104050, 1748.104050, 0.000000, X, Y) && !ellipse(31293.936200, 34268.658400, 1174.952034, 1174.952034, 0.000000, X, Y) && !ellipse(30490.871000, 34238.287600, 1664.000048, 1664.000048, 0.000000, X, Y) && !ellipse(33751.005310, 32927.595764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33847.173126, 32473.620270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34945.914520, 31952.268097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34069.229156, 31878.906982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33914.082520, 31179.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35369.922200, 29792.457600, 770.042422, 770.042422, 0.000000, X, Y) && !ellipse(35188.188599, 28668.891602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19922.945200, 28905.392000, 1471.185393, 1471.185393, 0.000000, X, Y) && !ellipse(35064.267761, 28230.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36174.731110, 28318.252502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34743.054352, 27096.657593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20053.109800, 26692.180000, 1426.290599, 1426.290599, 0.000000, X, Y) && !ellipse(34627.532000, 26579.356000, 1619.808047, 1619.808047, 0.000000, X, Y) && !ellipse(20357.277252, 25758.339630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34708.005310, 25710.673889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34708.061066, 24734.825836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34311.494000, 24174.434000, 1281.320037, 1281.320037, 0.000000, X, Y)
[Sun Dec  4 14:44:49 2011] Writing fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src24.gif
[Sun Dec  4 14:58:31 2011] Mean detx,y = (8580.93, -161.62) 
[Sun Dec  4 14:58:32 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 15:00:02 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 15:00:02 2011] Setting source spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Dec  4 15:00:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Dec  5 14:00:18 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:18 2011] Error reading totcts from fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Dec  5 14:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:21 2011] Using photon index=1.80, rate=0.0339, arf fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src24.arf
[Mon Dec  5 14:00:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:21 2011] Updating source flux to 5.1e-13
[Mon Dec  5 14:00:35 2011] Flag c found in src. 24 procflags, skipping spectral fitting