[Tue Nov 29 11:11:55 2011] Detection parameters:
  Position = (311.3, 496.0) = 18 23 40.90 -30 8 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 453.8 +/- 31.2
  Background counts = 85.6
  Rate = 0.01 +/- 0.0008

[Tue Nov 29 11:11:59 2011] Off-axis axis estimate = 14.35'
[Tue Nov 29 11:26:55 2011] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 11:26:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 11:26:55 2011] Initial guess for spatial extent in simple fitting = 13.60"
[Tue Nov 29 11:26:55 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.064
[Tue Nov 29 11:26:55 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 13.60"
[Tue Nov 29 20:53:41 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src17.ximg exists
[Tue Nov 29 20:53:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src17.csv
[Tue Nov 29 20:53:41 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Nov 29 20:53:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src17.csv
[Tue Nov 29 20:53:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Nov 29 20:53:43 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Nov 29 20:53:43 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Dec  3 11:36:18 2011] Warning, spatial fit 17 centroid is now closest to src. 53
[Sat Dec  3 11:36:18 2011] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.839170 pixels away
[Sat Dec  3 11:36:18 2011] Vigneting correction estimate = 1.000000
[Sat Dec  3 11:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec  3 11:36:18 2011] Assessing source extent using major
[Sat Dec  3 11:36:18 2011] Source does appear to be extended
[Sat Dec  3 11:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec  3 11:36:18 2011] Source is confused with source 17
[Sat Dec  3 11:36:18 2011] Source is confused with source 53
[Sat Dec  3 11:36:59 2011] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Sat Dec  3 11:36:59 2011] Initial guess for spatial extent in simple fitting = 13.60"
[Sat Dec  3 11:36:59 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.064
[Sat Dec  3 11:36:59 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 13.60"
[Sat Dec  3 16:39:18 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src17.ximg exists
[Sat Dec  3 16:39:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src17.csv
[Sat Dec  3 16:39:18 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Dec  3 16:39:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src17.csv
[Sat Dec  3 16:39:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec  3 16:39:20 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Dec  3 16:39:20 2011] fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Dec  3 16:39:20 2011] Fit fullrun_mos1_xmm0084110201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Dec  4 14:44:18 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.698316 pixels away
[Sun Dec  4 14:44:18 2011] Spatial fit model total counts = 2847.220000, observed total counts = 2850.000000
[Sun Dec  4 14:44:18 2011] Offset between fit and detection position for source 20 = 1.229566 pixels
[Sun Dec  4 14:44:18 2011] 1562.750000 total counts/ 1313.560000 bgd. counts: snr = 6.875522
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.229566 pixels
  Position = (311.2, 497.2) = 18 23 40.94 -30 8 32.2
  Extent = 7.7 (5.7-9.5)", rotation angle = 0
  Source counts = 249.2 +/- 39.5
  Background counts = 1313.6
  Rate = 0.006 +/- 0.001
[Sun Dec  4 14:44:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec  4 14:44:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec  4 14:44:18 2011] Assessing source extent using major axis lower bound
[Sun Dec  4 14:44:18 2011] Source does appear to be extended
[Sun Dec  4 14:44:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec  4 14:44:48 2011] XMMSAS src. selection expression = ellipse(27022.422200, 43209.010600, 459.912013, 459.912013, 0.000000, X, Y)
[Sun Dec  4 14:44:48 2011] Writing source region out to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src20_src.reg
[Sun Dec  4 14:44:48 2011] Extracting stamp from image fullrun_mos1_xmm0084110201_pi300-10000_cl_sm2.00.img.gz, (285, 471) - (338, 524)
[Sun Dec  4 14:44:48 2011] XMMSAS bgd. selection expression = annulus(27022.422200, 43209.010600, 766.520022, 1533.040044, X, Y) && !ellipse(27047.417419, 41535.686615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27068.224884, 42060.450500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27030.657200, 42453.751600, 2141.960062, 426.497612, 88.539920, X, Y) && !ellipse(27036.338000, 43986.176200, 948.808027, 948.808027, 0.000000, X, Y) && !ellipse(26456.137085, 44021.314423, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec  4 14:44:48 2011] Writing fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src20.gif
[Sun Dec  4 14:57:43 2011] Mean detx,y = (15866.57, -231.18) 
[Sun Dec  4 14:57:43 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec  4 14:57:48 2011] Binned source spectrum to 10 counts/bin
[Sun Dec  4 14:57:48 2011] Setting source spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Dec  4 14:57:48 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Dec  5 14:00:17 2011] Updating aperture counts using extracted products
[Mon Dec  5 14:00:17 2011] Error reading totcts from fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Dec  5 14:00:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec  5 14:00:21 2011] Using photon index=1.80, rate=0.00645, arf fullrun_mos1_xmm0084110201_pi300-10000_pass1_cl_src20.arf
[Mon Dec  5 14:00:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec  5 14:00:21 2011] Updating source flux to 2.2e-13
[Mon Dec  5 14:00:35 2011] Flag c found in src. 20 procflags, skipping spectral fitting