[Tue Aug 21 10:21:18 2012] Detection parameters:
  Position = (277.9, 280.0) = 19 11 10.63 9 6 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7348.7 +/- 106.8
  Background counts = 186.8
  Rate = 0.5 +/- 0.007

[Tue Aug 21 10:21:19 2012] Off-axis axis estimate = 2.00'
[Tue Aug 21 10:25:28 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:25:28 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Tue Aug 21 10:25:28 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821
[Tue Aug 21 10:25:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.43"
[Tue Aug 21 12:53:10 2012] fullrun_pn_xmm0084100501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 12:53:10 2012] fullrun_pn_xmm0084100501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 12:53:11 2012] Fit fullrun_pn_xmm0084100501_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Aug 21 12:53:11 2012] fullrun_pn_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 12:53:11 2012] fullrun_pn_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 12:53:11 2012] Fit fullrun_pn_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 16:30:36 2012] Spatial fit model total counts = 25728.500000, observed total counts = 25510.000000
[Tue Aug 21 16:30:36 2012] Offset between fit and detection position for source 1 = 0.967754 pixels
[Tue Aug 21 16:30:36 2012] 24437.660000 total counts/ 16795.000000 bgd. counts: snr = 58.973178
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.967754 pixels
  Position = (278.5, 280.9) = 19 11 10.48 9 6 27.4
  Extent = 14.9 (14.8-29.7)", rotation angle = 0
  Source counts = 7642.7 +/- 156.3
  Background counts = 16795.0
  Rate = 0.5 +/- 0.009
[Tue Aug 21 16:30:36 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:36 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 16:30:36 2012] Source does appear to be extended
[Tue Aug 21 16:30:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:30:36 2012] Source is confused with source 2
[Tue Aug 21 16:31:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 16:31:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 16:31:05 2012] Initial guess for spatial extent in simple fitting = 14.85"
[Tue Aug 21 16:31:05 2012] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.914
[Tue Aug 21 16:31:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.85"
[Tue Aug 21 18:04:14 2012] fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 18:04:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 18:04:14 2012] fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 18:04:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 18:04:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 18:04:15 2012] fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 18:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 21 18:04:15 2012] fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 18:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Aug 21 18:04:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:08:23 2012] Warning, spatial fit 1 centroid is now closest to src. 27
[Tue Aug 21 21:08:23 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:23 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 21:08:23 2012] Source does appear to be extended
[Tue Aug 21 21:08:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 21:08:38 2012] Counts = 7642.660000, rescaling region sizes by 2.000000
[Tue Aug 21 21:08:38 2012] XMMSAS src. selection expression = ellipse(24178.105200, 24385.796400, 1782.456051, 1782.456051, 0.000000, X, Y)
[Tue Aug 21 21:08:38 2012] Writing source region out to fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 21 21:08:38 2012] Extracting stamp from image fullrun_pn_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (176, 178) - (381, 383)
[Tue Aug 21 21:08:38 2012] XMMSAS bgd. selection expression = annulus(24178.105200, 24385.796400, 5941.520171, 11883.040342, X, Y) && !ellipse(24831.716200, 24416.425600, 1152.856033, 701.179220, 343.004900, X, Y) && !ellipse(32007.022000, 36589.624000, 611.525618, 611.525618, 0.000000, X, Y) && !ellipse(25093.753937, 26224.857483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25835.290400, 25194.799400, 1078.032031, 1078.032031, 0.000000, X, Y) && !ellipse(27235.990875, 25077.762695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23020.353943, 24091.047607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.466827, 23654.417419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24942.427887, 22967.141846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24237.907898, 22918.108765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26288.286133, 22876.395599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25613.627258, 22889.285767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23545.654144, 23011.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24182.277069, 22477.010162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27642.252838, 18858.509232, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 21:08:38 2012] Writing fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1.gif
[Tue Aug 21 21:08:57 2012] Mean detx,y = (335.95, -284.36) 
[Tue Aug 21 21:09:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 21:14:27 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 21:14:27 2012] Setting source spectrum file to fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 21 21:14:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 22 10:26:35 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:35 2012] Error reading totcts from fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 10:26:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:36 2012] Using photon index=1.80, rate=0.453, arf fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1.arf
[Wed Aug 22 10:26:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:37 2012] Updating source flux to 1e-12
[Wed Aug 22 10:40:12 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Aug 22 10:43:14 2012] Reading fit data from xmm0084100501/analysis//spectral/fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug 22 10:43:14 2012] Spectral fit parameter nH value = 4.74492e+22
[Wed Aug 22 10:43:14 2012] Spectral fit parameter PhoIndex value = 3.5763
[Wed Aug 22 10:43:14 2012] Failed to get F(0.3-8.0) from xmm0084100501/analysis//spectral/fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug 22 10:43:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:43:14 2012] Using Nh = 4.7e+22, photon index=3.58, rate=0.453, arf fullrun_pn_xmm0084100501_pi300-10000_pass1_cl_src1.arf
[Wed Aug 22 10:43:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:43:14 2012] Updating source flux to 2.5e-12