[Tue Aug 21 10:22:35 2012] Detection parameters:
  Position = (370.6, 419.2) = 19 10 43.41 9 16 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5630.2 +/- 88.3
  Background counts = 9.2
  Rate = 0.3 +/- 0.005

[Tue Aug 21 10:22:36 2012] Off-axis axis estimate = 10.20'
[Tue Aug 21 14:36:39 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 14:36:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 14:36:39 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Tue Aug 21 14:36:39 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.058
[Tue Aug 21 14:36:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.53"
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 16:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 16:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 16:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 16:30:24 2012] Fit fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 16:30:53 2012] Spatial fit model total counts = 5788.000000, observed total counts = 5788.000000
[Tue Aug 21 16:30:53 2012] Offset between fit and detection position for source 8 = 0.276192 pixels
[Tue Aug 21 16:30:53 2012] 5745.810000 total counts/ 1418.910000 bgd. counts: snr = 114.868099
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.276192 pixels
  Position = (370.3, 419.2) = 19 10 43.49 9 16 29.3
  Extent = 7.0 (6.8-7.2)", rotation angle = 0
  Source counts = 4326.9 +/- 75.8
  Background counts = 1418.9
  Rate = 0.2 +/- 0.004
[Tue Aug 21 16:30:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:53 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 16:30:53 2012] Source does appear to be extended
[Tue Aug 21 16:30:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:53:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 19:53:56 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Tue Aug 21 19:53:56 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Tue Aug 21 19:53:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.97"
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 21:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 21:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 21:08:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 21:08:18 2012] Fit fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 21:08:31 2012] Spatial fit model total counts = 5362.010000, observed total counts = 5355.000000
[Tue Aug 21 21:08:31 2012] Offset between fit and detection position for source 8 = 0.011466 pixels
[Tue Aug 21 21:08:31 2012] 5356.820000 total counts/ 1342.970000 bgd. counts: snr = 109.528713
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.011466 pixels
  Position = (370.3, 419.2) = 19 10 43.49 9 16 29.3
  Extent = 6.3 (6.1-6.5)", rotation angle = 0
  Source counts = 4013.8 +/- 73.2
  Background counts = 1343.0
  Rate = 0.2 +/- 0.004
[Tue Aug 21 21:08:31 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:31 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 21:08:31 2012] Source does appear to be extended
[Tue Aug 21 21:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 08:52:46 2012] Counts = 4013.850000, rescaling region sizes by 2.000000
[Wed Aug 22 08:52:46 2012] XMMSAS src. selection expression = ellipse(32169.433800, 36424.567800, 753.171622, 753.171622, 0.000000, X, Y)
[Wed Aug 22 08:52:46 2012] Writing source region out to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8_src.reg
[Wed Aug 22 08:52:46 2012] Extracting stamp from image fullrun_mos2_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (327, 376) - (414, 463)
[Wed Aug 22 08:52:46 2012] XMMSAS bgd. selection expression = annulus(32169.433800, 36424.567800, 2510.572072, 5021.144144, X, Y)
[Wed Aug 22 08:52:46 2012] Writing fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8.gif
[Wed Aug 22 08:52:49 2012] Mean detx,y = (6222.44, -12766.80) 
[Wed Aug 22 08:52:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 08:53:23 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 08:53:23 2012] Setting source spectrum file to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Aug 22 08:53:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Aug 22 10:26:42 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:42 2012] Error reading totcts from fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Aug 22 10:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:43 2012] Using photon index=1.80, rate=0.216, arf fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8.arf
[Wed Aug 22 10:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:43 2012] Updating source flux to 5e-12
[Wed Aug 22 10:40:12 2012] Reading fit data from xmm0084100501/analysis//spectral/fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8_pl.csv
[Wed Aug 22 10:40:12 2012] Spectral fit parameter nH value = 4.87666e+22
[Wed Aug 22 10:40:12 2012] Spectral fit parameter PhoIndex value = 1.20598
[Wed Aug 22 10:40:12 2012] Failed to get F(0.3-8.0) from xmm0084100501/analysis//spectral/fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Wed Aug 22 10:40:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:40:12 2012] Using Nh = 4.9e+22, photon index=1.21, rate=0.216, arf fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src8.arf
[Wed Aug 22 10:40:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:40:12 2012] Updating source flux to 1.6e-11