[Tue Aug 21 10:22:35 2012] Detection parameters:
  Position = (279.4, 267.0) = 19 11 10.19 9 5 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 828.2 +/- 38.8
  Background counts = 66.5
  Rate = 0.05 +/- 0.002

[Tue Aug 21 10:22:36 2012] Off-axis axis estimate = 2.66'
[Tue Aug 21 14:36:39 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 14:36:39 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Tue Aug 21 14:36:39 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.959
[Tue Aug 21 14:36:39 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.76"
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src11.ximg exists
[Tue Aug 21 16:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src11.csv
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Aug 21 16:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src11.csv
[Tue Aug 21 16:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 16:30:24 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Aug 21 16:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Aug 21 16:30:24 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Aug 21 16:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Aug 21 16:30:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 16:30:53 2012] Source 20 is offset by 2.095232 and -0.621843 pixels which is larger than
2 X fitted extent = 0.918883 x 0.918883, not incorporating fit results
[Tue Aug 21 16:30:53 2012] Source 20 is offset by -2.504607 and -8.107705 pixels which is larger than
2 X fitted extent = 4.370432 x 4.370432, not incorporating fit results
[Tue Aug 21 16:30:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:53 2012] Assessing source extent using major
[Tue Aug 21 16:30:53 2012] Source does appear to be extended
[Tue Aug 21 16:30:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:53:56 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 19:53:56 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Tue Aug 21 19:53:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.959
[Tue Aug 21 19:53:56 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.76"
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src11.ximg exists
[Tue Aug 21 21:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src11.csv
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Aug 21 21:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src11.csv
[Tue Aug 21 21:08:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:08:19 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Aug 21 21:08:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Aug 21 21:08:19 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Aug 21 21:08:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Aug 21 21:08:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:08:31 2012] Source 20 is offset by 2.294841 and -0.821452 pixels which is larger than
2 X fitted extent = 0.893931 x 7.151448, not incorporating fit results
[Tue Aug 21 21:08:31 2012] Source 20 is offset by -2.511895 and -8.107705 pixels which is larger than
2 X fitted extent = 4.359196 x 4.359196, not incorporating fit results
[Tue Aug 21 21:08:31 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:31 2012] Assessing source extent using major
[Tue Aug 21 21:08:31 2012] Source does appear to be extended
[Tue Aug 21 21:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 08:52:46 2012] XMMSAS src. selection expression = ellipse(24263.327148, 23182.857666, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 08:52:46 2012] Writing source region out to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src20_src.reg
[Wed Aug 22 08:52:46 2012] Extracting stamp from image fullrun_mos2_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (242, 230) - (317, 305)
[Wed Aug 22 08:52:46 2012] XMMSAS bgd. selection expression = annulus(24263.327148, 23182.857666, 1087.500000, 2175.000000, X, Y) && !ellipse(24526.430000, 24269.748000, 602.012017, 602.012017, 0.000000, X, Y) && !ellipse(25169.791321, 24484.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25829.434200, 25225.183200, 1078.472031, 1078.472031, 0.000000, X, Y) && !ellipse(23476.907471, 23787.198090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.015839, 23014.563324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26450.008800, 25146.919400, 1090.608031, 1090.608031, 0.000000, X, Y) && !ellipse(23723.243744, 24306.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26890.039600, 23499.946000, 1439.800041, 1439.800041, 0.000000, X, Y) && !ellipse(24017.821899, 22403.510986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.472000, 22763.164200, 1269.152037, 1269.152037, 0.000000, X, Y) && !ellipse(24844.566162, 22399.613403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23874.240570, 25959.391724, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 08:52:46 2012] Writing fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src20.gif
[Wed Aug 22 09:21:19 2012] Mean detx,y = (-194.85, 1244.67) 
[Wed Aug 22 09:21:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 09:21:27 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 09:21:27 2012] Setting source spectrum file to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Aug 22 09:21:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Aug 22 10:15:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 10:15:15 2012] rmf not generated due to insufficient counts
[Wed Aug 22 10:26:43 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:43 2012] Error reading totcts from fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Aug 22 10:26:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:44 2012] Using photon index=1.80, rate=0.0488, arf fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src20.arf
[Wed Aug 22 10:26:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:44 2012] Updating source flux to 5.1e-13
[Wed Aug 22 10:35:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting