[Tue Aug 21 10:22:35 2012] Detection parameters:
  Position = (275.0, 298.9) = 19 11 11.50 9 7 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.3 +/- 21.0
  Background counts = 53.8
  Rate = 0.01 +/- 0.001

[Tue Aug 21 10:22:36 2012] Off-axis axis estimate = 1.70'
[Tue Aug 21 14:36:39 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 14:36:39 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Aug 21 14:36:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Aug 21 14:36:39 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.28"
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src17.ximg exists
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Aug 21 16:30:23 2012] Fit fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src17 appears to have run properly
[Tue Aug 21 16:30:24 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Aug 21 16:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Aug 21 16:30:24 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Aug 21 16:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Aug 21 16:30:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 16:30:53 2012] Warning, spatial fit 17 centroid is now closest to src. 6
[Tue Aug 21 16:30:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:53 2012] Assessing source extent using major
[Tue Aug 21 16:30:53 2012] Source does appear to be extended
[Tue Aug 21 16:30:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:53:56 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 19:53:56 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Aug 21 19:53:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Aug 21 19:53:56 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.28"
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src17.ximg exists
[Tue Aug 21 21:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src17.csv
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Aug 21 21:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src17.csv
[Tue Aug 21 21:08:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:08:19 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Aug 21 21:08:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Aug 21 21:08:19 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Aug 21 21:08:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue Aug 21 21:08:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:08:31 2012] Warning, spatial fit 17 centroid is now closest to src. 17
[Tue Aug 21 21:08:31 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:31 2012] Assessing source extent using major
[Tue Aug 21 21:08:31 2012] Source does appear to be extended
[Tue Aug 21 21:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 08:52:46 2012] XMMSAS src. selection expression = ellipse(23874.240570, 25959.391724, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 08:52:46 2012] Writing source region out to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src18_src.reg
[Wed Aug 22 08:52:46 2012] Extracting stamp from image fullrun_mos2_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (237, 261) - (312, 336)
[Wed Aug 22 08:52:46 2012] XMMSAS bgd. selection expression = annulus(23874.240570, 25959.391724, 1087.500000, 2175.000000, X, Y) && !ellipse(24526.430000, 24269.748000, 602.012017, 602.012017, 0.000000, X, Y) && !ellipse(25169.791321, 24484.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25829.434200, 25225.183200, 1078.472031, 1078.472031, 0.000000, X, Y) && !ellipse(23476.907471, 23787.198090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.015839, 23014.563324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26450.008800, 25146.919400, 1090.608031, 1090.608031, 0.000000, X, Y) && !ellipse(23723.243744, 24306.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26890.039600, 23499.946000, 1439.800041, 1439.800041, 0.000000, X, Y) && !ellipse(24263.327148, 23182.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.472000, 22763.164200, 1269.152037, 1269.152037, 0.000000, X, Y) && !ellipse(24898.951782, 26307.673157, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 08:52:46 2012] Writing fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src18.gif
[Wed Aug 22 09:22:37 2012] Mean detx,y = (-837.56, -1332.85) 
[Wed Aug 22 09:22:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 09:22:48 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 09:22:49 2012] Setting source spectrum file to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Aug 22 09:22:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Aug 22 10:25:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 10:25:51 2012] rmf not generated due to insufficient counts
[Wed Aug 22 10:26:43 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:43 2012] Error reading totcts from fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Aug 22 10:26:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:44 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src18.arf
[Wed Aug 22 10:26:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:44 2012] Updating source flux to 1.2e-13
[Wed Aug 22 10:35:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting