[Tue Aug 21 10:22:35 2012] Detection parameters:
  Position = (303.4, 289.0) = 19 11 3.14 9 7 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1707.4 +/- 54.9
  Background counts = 49.2
  Rate = 0.09 +/- 0.003

[Tue Aug 21 10:22:36 2012] Off-axis axis estimate = 0.78'
[Tue Aug 21 14:36:39 2012] Using EEF radius (= 6.82 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 14:36:39 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Tue Aug 21 14:36:39 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.936
[Tue Aug 21 14:36:39 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.82"
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src7.ximg exists
[Tue Aug 21 16:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src7.csv
[Tue Aug 21 16:30:23 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Aug 21 16:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src7.csv
[Tue Aug 21 16:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 16:30:24 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Aug 21 16:30:24 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Aug 21 16:30:24 2012] Fit fullrun_mos2_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Aug 21 16:30:53 2012] Spatial fit model total counts = 7809.950000, observed total counts = 7808.000000
[Tue Aug 21 16:30:53 2012] Offset between fit and detection position for source 1 = 1.306063 pixels
[Tue Aug 21 16:30:53 2012] 7093.330000 total counts/ 5708.750000 bgd. counts: snr = 18.325150
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.306063 pixels
  Position = (304.6, 289.6) = 19 11 2.81 9 7 5.5
  Extent = 13.6 (13.6-27.3)", rotation angle = 0
  Source counts = 1384.6 +/- 84.2
  Background counts = 5708.8
  Rate = 0.07 +/- 0.005
[Tue Aug 21 16:30:53 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:53 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 16:30:53 2012] Source does appear to be extended
[Tue Aug 21 16:30:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:30:53 2012] Source is confused with source 2
[Tue Aug 21 19:53:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 19:53:56 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Tue Aug 21 19:53:56 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.928
[Tue Aug 21 19:53:56 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.63"
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src7.ximg exists
[Tue Aug 21 21:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src7.csv
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Aug 21 21:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src7.csv
[Tue Aug 21 21:08:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Aug 21 21:08:18 2012] fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Aug 21 21:08:18 2012] Fit fullrun_mos2_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Aug 21 21:08:31 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Tue Aug 21 21:08:31 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:31 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 21:08:31 2012] Source does appear to be extended
[Tue Aug 21 21:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 08:52:46 2012] Counts = 1384.580000, rescaling region sizes by 2.000000
[Wed Aug 22 08:52:46 2012] XMMSAS src. selection expression = ellipse(26450.008800, 25146.919400, 1635.912047, 1635.912047, 0.000000, X, Y)
[Wed Aug 22 08:52:46 2012] Writing source region out to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 22 08:52:46 2012] Extracting stamp from image fullrun_mos2_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (211, 196) - (399, 384)
[Wed Aug 22 08:52:46 2012] XMMSAS bgd. selection expression = annulus(26450.008800, 25146.919400, 5453.040157, 10906.080314, X, Y) && !ellipse(32169.433800, 36424.567800, 502.114414, 502.114414, 0.000000, X, Y) && !ellipse(24526.430000, 24269.748000, 602.012017, 602.012017, 0.000000, X, Y) && !ellipse(25169.791321, 24484.655701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25829.434200, 25225.183200, 1078.472031, 1078.472031, 0.000000, X, Y) && !ellipse(23476.907471, 23787.198090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.015839, 23014.563324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23723.243744, 24306.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26890.039600, 23499.946000, 1439.800041, 1439.800041, 0.000000, X, Y) && !ellipse(24017.821899, 22403.510986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24263.327148, 23182.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.472000, 22763.164200, 1269.152037, 1269.152037, 0.000000, X, Y) && !ellipse(24898.951782, 26307.673157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24844.566162, 22399.613403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23874.240570, 25959.391724, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 08:52:46 2012] Writing fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src1.gif
[Wed Aug 22 09:08:20 2012] Mean detx,y = (1450.22, -561.66) 
[Wed Aug 22 09:08:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 09:12:10 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 09:12:10 2012] Setting source spectrum file to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 09:12:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 22 10:26:42 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:42 2012] Error reading totcts from fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 10:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:43 2012] Using photon index=1.80, rate=0.0744, arf fullrun_mos2_xmm0084100501_pi300-10000_pass1_cl_src1.arf
[Wed Aug 22 10:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:44 2012] Updating source flux to 6.9e-13
[Wed Aug 22 10:35:46 2012] Flag c found in src. 1 procflags, skipping spectral fitting