[Tue Aug 21 10:22:02 2012] Detection parameters:
  Position = (370.2, 420.1) = 19 10 43.52 9 16 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4294.2 +/- 75.6
  Background counts = 8.6
  Rate = 0.2 +/- 0.004

[Tue Aug 21 10:22:03 2012] Off-axis axis estimate = 10.24'
[Tue Aug 21 12:53:12 2012] Using EEF radius (= 11.55 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 12:53:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 12:53:12 2012] Initial guess for spatial extent in simple fitting = 11.55"
[Tue Aug 21 12:53:12 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.904
[Tue Aug 21 12:53:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.55"
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 14:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 14:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 14:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 14:36:38 2012] Fit fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 21 16:30:44 2012] Spatial fit model total counts = 4685.190000, observed total counts = 4365.000000
[Tue Aug 21 16:30:44 2012] Offset between fit and detection position for source 6 = 0.576659 pixels
[Tue Aug 21 16:30:44 2012] 4723.650000 total counts/ 1512.490000 bgd. counts: snr = 82.568746
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.576659 pixels
  Position = (369.6, 420.1) = 19 10 43.70 9 16 33.2
  Extent = 5.9 (5.8-6.1)", rotation angle = 0
  Source counts = 3211.2 +/- 68.7
  Background counts = 1512.5
  Rate = 0.2 +/- 0.004
[Tue Aug 21 16:30:44 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:44 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 16:30:44 2012] Source does appear to be extended
[Tue Aug 21 16:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 18:04:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 18:04:15 2012] Initial guess for spatial extent in simple fitting = 5.94"
[Tue Aug 21 18:04:15 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.862
[Tue Aug 21 18:04:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.94"
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 21 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 21 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src1.csv
[Tue Aug 21 19:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 21 19:53:55 2012] Fit fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 21 21:08:27 2012] Spatial fit model total counts = 4291.320000, observed total counts = 4062.000000
[Tue Aug 21 21:08:27 2012] Offset between fit and detection position for source 6 = 0.025382 pixels
[Tue Aug 21 21:08:27 2012] 4290.080000 total counts/ 1191.930000 bgd. counts: snr = 89.738140
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.025382 pixels
  Position = (369.6, 420.1) = 19 10 43.69 9 16 33.2
  Extent = 5.7 (5.5-5.8)", rotation angle = 0
  Source counts = 3098.2 +/- 65.5
  Background counts = 1191.9
  Rate = 0.2 +/- 0.004
[Tue Aug 21 21:08:27 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:27 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 21:08:27 2012] Source does appear to be extended
[Tue Aug 21 21:08:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 03:33:04 2012] Counts = 3098.150000, rescaling region sizes by 2.000000
[Wed Aug 22 03:33:04 2012] XMMSAS src. selection expression = ellipse(32110.169000, 36502.731000, 682.216820, 682.216820, 0.000000, X, Y)
[Wed Aug 22 03:33:04 2012] Writing source region out to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6_src.reg
[Wed Aug 22 03:33:04 2012] Extracting stamp from image fullrun_mos1_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (330, 381) - (409, 459)
[Wed Aug 22 03:33:04 2012] XMMSAS bgd. selection expression = annulus(32110.169000, 36502.731000, 2274.056065, 4548.112131, X, Y)
[Wed Aug 22 03:33:04 2012] Writing fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6.gif
[Wed Aug 22 03:33:07 2012] Mean detx,y = (-12597.17, -6363.11) 
[Wed Aug 22 03:33:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 03:33:56 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 03:33:57 2012] Setting source spectrum file to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Aug 22 03:33:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Aug 22 10:26:38 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:38 2012] Error reading totcts from fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Aug 22 10:26:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:41 2012] Using photon index=1.80, rate=0.167, arf fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6.arf
[Wed Aug 22 10:26:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:41 2012] Updating source flux to 4.7e-12
[Wed Aug 22 10:35:46 2012] Reading fit data from xmm0084100501/analysis//spectral/fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6_pl.csv
[Wed Aug 22 10:35:46 2012] Spectral fit parameter nH value = 4.53325e+22
[Wed Aug 22 10:35:46 2012] Spectral fit parameter PhoIndex value = 1.10375
[Wed Aug 22 10:35:46 2012] Failed to get F(0.3-8.0) from xmm0084100501/analysis//spectral/fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Wed Aug 22 10:35:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:35:46 2012] Using Nh = 4.5e+22, photon index=1.10, rate=0.167, arf fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src6.arf
[Wed Aug 22 10:35:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:35:46 2012] Updating source flux to 1.5e-11