[Tue Aug 21 10:22:02 2012] Detection parameters:
  Position = (288.0, 281.9) = 19 11 7.69 9 6 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2892.3 +/- 68.4
  Background counts = 79.6
  Rate = 0.2 +/- 0.004

[Tue Aug 21 10:22:03 2012] Off-axis axis estimate = 1.42'
[Tue Aug 21 12:53:12 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 12:53:12 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Tue Aug 21 12:53:12 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Tue Aug 21 12:53:12 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.14"
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src3.ximg exists
[Tue Aug 21 14:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Aug 21 14:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 14:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Aug 21 14:36:39 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Aug 21 14:36:39 2012] Fit fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Aug 21 16:30:44 2012] Spatial fit model total counts = 11549.400000, observed total counts = 11547.000000
[Tue Aug 21 16:30:44 2012] Offset between fit and detection position for source 4 = 3.551864 pixels
[Tue Aug 21 16:30:44 2012] 11356.000000 total counts/ 8796.620000 bgd. counts: snr = 27.288324
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.551864 pixels
  Position = (284.8, 280.4) = 19 11 8.63 9 6 25.3
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 2559.4 +/- 106.6
  Background counts = 8796.6
  Rate = 0.1 +/- 0.006
[Tue Aug 21 16:30:44 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:44 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 16:30:44 2012] Source does appear to be extended
[Tue Aug 21 16:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:30:44 2012] Source is confused with source 2
[Tue Aug 21 18:04:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 18:04:15 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Tue Aug 21 18:04:15 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.979
[Tue Aug 21 18:04:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.28"
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 21 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 21 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src3.csv
[Tue Aug 21 19:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 21 19:53:55 2012] Fit fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Aug 21 21:08:27 2012] Spatial fit model total counts = 16843.300000, observed total counts = 16830.000000
[Tue Aug 21 21:08:27 2012] Offset between fit and detection position for source 4 = 3.790762 pixels
[Tue Aug 21 21:08:27 2012] 12872.290000 total counts/ 9199.090000 bgd. counts: snr = 38.297651
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.790762 pixels
  Position = (288.5, 280.8) = 19 11 7.52 9 6 27.2
  Extent = 16.5 (15.7-18.0)", rotation angle = 0
  Source counts = 3673.2 +/- 113.5
  Background counts = 9199.1
  Rate = 0.2 +/- 0.006
[Tue Aug 21 21:08:27 2012] Spatial fit model total counts = 10256.200000, observed total counts = 10284.000000
[Tue Aug 21 21:08:27 2012] Offset between fit and detection position for source 4 = 2.762881 pixels
[Tue Aug 21 21:08:27 2012] Warning, changing simple spatial fit ID from 3 to 11
[Tue Aug 21 21:08:27 2012] 10256.000000 total counts/ 8913.300000 bgd. counts: snr = 14.221969
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.762881 pixels
  Position = (286.3, 282.5) = 19 11 8.16 9 6 34.5
  Extent = 22.7 (20.0-25.4)", rotation angle = 0
  Source counts = 1342.7 +/- 101.3
  Background counts = 8913.3
  Rate = 0.07 +/- 0.005
[Tue Aug 21 21:08:27 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:27 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 21:08:27 2012] Source does appear to be extended
[Tue Aug 21 21:08:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 03:33:04 2012] Counts = 1342.700000, rescaling region sizes by 2.000000
[Wed Aug 22 03:33:04 2012] XMMSAS src. selection expression = ellipse(24862.958000, 24527.748000, 2725.188078, 2725.188078, 0.000000, X, Y)
[Wed Aug 22 03:33:04 2012] Writing source region out to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 22 03:33:04 2012] Extracting stamp from image fullrun_mos1_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (130, 126) - (443, 439)
[Wed Aug 22 03:33:04 2012] XMMSAS bgd. selection expression = annulus(24862.958000, 24527.748000, 9083.960261, 18167.920523, X, Y) && !ellipse(32110.169000, 36502.731000, 454.811213, 454.811213, 0.000000, X, Y) && !ellipse(24090.250200, 24374.428000, 1018.808029, 1018.808029, 0.000000, X, Y) && !ellipse(25989.526800, 25194.659160, 1083.424031, 909.384026, 359.998000, X, Y) && !ellipse(23700.228600, 22775.692000, 1265.184036, 1265.184036, 0.000000, X, Y) && !ellipse(23273.982000, 23623.368000, 1265.184036, 1265.184036, 0.000000, X, Y) && !ellipse(23631.998352, 23198.461273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.756000, 24008.734000, 1191.160034, 1191.160034, 0.000000, X, Y) && !ellipse(26871.578000, 23312.220000, 2382.320069, 2382.320069, 0.000000, X, Y) && !ellipse(23255.182000, 23896.188000, 1531.216044, 1531.216044, 0.000000, X, Y) && !ellipse(23215.010071, 23017.759979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25337.411400, 23201.624000, 1260.248036, 1260.248036, 0.000000, X, Y) && !ellipse(11700.310600, 21943.991400, 501.447214, 501.447214, 0.000000, X, Y) && !ellipse(26854.152527, 8014.130348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.394000, 21775.344000, 1286.608037, 1286.608037, 0.000000, X, Y) && !ellipse(25112.397552, 26135.566193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.809509, 22473.184265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.311707, 22456.818665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23587.236000, 25445.226000, 1212.552035, 1212.552035, 0.000000, X, Y)
[Wed Aug 22 03:33:04 2012] Writing fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src4.gif
[Wed Aug 22 03:38:16 2012] Mean detx,y = (371.11, -485.45) 
[Wed Aug 22 03:38:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 03:46:23 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 03:46:24 2012] Setting source spectrum file to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 22 03:46:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 22 10:26:38 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:38 2012] Error reading totcts from fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 22 10:26:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:41 2012] Using photon index=1.80, rate=0.0722, arf fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src4.arf
[Wed Aug 22 10:26:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:41 2012] Updating source flux to 6.2e-13
[Wed Aug 22 10:26:45 2012] Flag c found in src. 4 procflags, skipping spectral fitting