[Tue Aug 21 10:22:03 2012] Detection parameters:
  Position = (293.9, 265.1) = 19 11 5.94 9 5 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 593.2 +/- 33.6
  Background counts = 71.3
  Rate = 0.03 +/- 0.002

[Tue Aug 21 10:22:03 2012] Off-axis axis estimate = 2.44'
[Tue Aug 21 12:53:12 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 12:53:12 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Tue Aug 21 12:53:12 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785
[Tue Aug 21 12:53:12 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.65"
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src11.ximg exists
[Tue Aug 21 14:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src11.csv
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Aug 21 14:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src11.csv
[Tue Aug 21 14:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:36:39 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Aug 21 14:36:39 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Aug 21 14:36:39 2012] Fit fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Aug 21 16:30:44 2012] Warning, spatial fit 11 centroid is now closest to src. 17
[Tue Aug 21 16:30:44 2012] Spatial fit model total counts = 2533.090000, observed total counts = 2565.000000
[Tue Aug 21 16:30:44 2012] Offset between fit and detection position for source 20 = 3.000568 pixels
[Tue Aug 21 16:30:44 2012] Warning, changing simple spatial fit ID from 11 to 16
[Tue Aug 21 16:30:44 2012] 2588.762000 total counts/ 2365.120000 bgd. counts: snr = 4.598612
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.000568 pixels
  Position = (291.8, 267.2) = 19 11 6.56 9 5 28.2
  Extent = 15.8 (15.7-31.5)", rotation angle = 0
  Source counts = 223.6 +/- 50.9
  Background counts = 2365.1
  Rate = 0.01 +/- 0.003
[Tue Aug 21 16:30:44 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:44 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 16:30:44 2012] Source does appear to be extended
[Tue Aug 21 16:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:30:44 2012] Source is confused with source 23
[Tue Aug 21 16:30:44 2012] Source is confused with source 21
[Tue Aug 21 18:04:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 18:04:15 2012] Initial guess for spatial extent in simple fitting = 15.75"
[Tue Aug 21 18:04:15 2012] source mask rpix=3.6, npix_max = 67, mask sum = 62, frac = 0.913
[Tue Aug 21 18:04:15 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 15.75"
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src11.ximg exists
[Tue Aug 21 19:53:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src11.csv
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Aug 21 19:53:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src11.csv
[Tue Aug 21 19:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:53:56 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Aug 21 19:53:56 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Aug 21 19:53:56 2012] Fit fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Aug 21 21:08:27 2012] Warning, spatial fit 11 centroid is now closest to src. 4
[Tue Aug 21 21:08:27 2012] Source 20 is offset by -2.440892 and 3.844690 pixels which is larger than
2 X fitted extent = 2.588189 x 0.905352, not incorporating fit results
[Tue Aug 21 21:08:27 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:27 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 21:08:27 2012] Source does appear to be extended
[Tue Aug 21 21:08:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 03:33:04 2012] XMMSAS src. selection expression = ellipse(25337.411400, 23201.624000, 945.186027, 945.186027, 0.000000, X, Y)
[Wed Aug 22 03:33:04 2012] Writing source region out to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src20_src.reg
[Wed Aug 22 03:33:04 2012] Extracting stamp from image fullrun_mos1_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (237, 213) - (346, 322)
[Wed Aug 22 03:33:04 2012] XMMSAS bgd. selection expression = annulus(25337.411400, 23201.624000, 1575.310045, 3150.620091, X, Y) && !ellipse(24090.250200, 24374.428000, 1018.808029, 1018.808029, 0.000000, X, Y) && !ellipse(24862.958000, 24527.748000, 1816.792052, 1816.792052, 0.000000, X, Y) && !ellipse(25989.526800, 25194.659160, 1083.424031, 909.384026, 359.998000, X, Y) && !ellipse(23700.228600, 22775.692000, 1265.184036, 1265.184036, 0.000000, X, Y) && !ellipse(23273.982000, 23623.368000, 1265.184036, 1265.184036, 0.000000, X, Y) && !ellipse(23631.998352, 23198.461273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.756000, 24008.734000, 1191.160034, 1191.160034, 0.000000, X, Y) && !ellipse(26871.578000, 23312.220000, 2382.320069, 2382.320069, 0.000000, X, Y) && !ellipse(23255.182000, 23896.188000, 1531.216044, 1531.216044, 0.000000, X, Y) && !ellipse(23215.010071, 23017.759979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.394000, 21775.344000, 1286.608037, 1286.608037, 0.000000, X, Y) && !ellipse(25112.397552, 26135.566193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.809509, 22473.184265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.311707, 22456.818665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23587.236000, 25445.226000, 1212.552035, 1212.552035, 0.000000, X, Y)
[Wed Aug 22 03:33:04 2012] Writing fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src20.gif
[Wed Aug 22 04:22:54 2012] Mean detx,y = (1159.02, -1036.09) 
[Wed Aug 22 04:22:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 04:23:07 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 04:23:07 2012] Setting source spectrum file to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Aug 22 04:23:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Aug 22 10:26:40 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:40 2012] Error reading totcts from fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Aug 22 10:26:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:41 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src20.arf
[Wed Aug 22 10:26:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:41 2012] Updating source flux to 1.2e-13
[Wed Aug 22 10:26:45 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Wed Aug 22 10:26:45 2012] Flag c found in src. 20 procflags, skipping spectral fitting