[Tue Aug 21 10:22:03 2012] Detection parameters:
  Position = (307.9, 272.0) = 19 11 1.83 9 5 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 934.1 +/- 41.0
  Background counts = 58.0
  Rate = 0.05 +/- 0.002

[Tue Aug 21 10:22:03 2012] Off-axis axis estimate = 2.03'
[Tue Aug 21 12:53:12 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 12:53:12 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Aug 21 12:53:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Tue Aug 21 12:53:12 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.44"
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src9.ximg exists
[Tue Aug 21 14:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src9.csv
[Tue Aug 21 14:36:38 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Aug 21 14:36:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src9.csv
[Tue Aug 21 14:36:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 14:36:39 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Aug 21 14:36:39 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Aug 21 14:36:39 2012] Fit fullrun_mos1_xmm0084100501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Aug 21 16:30:44 2012] Warning, spatial fit 9 centroid is now closest to src. 16
[Tue Aug 21 16:30:44 2012] Source 17 is offset by 6.863790 and 3.270093 pixels which is larger than
2 X fitted extent = 1.265297 x 1.265297, not incorporating fit results
[Tue Aug 21 16:30:44 2012] Source 17 is offset by 4.503790 and 5.382897 pixels which is larger than
2 X fitted extent = 2.729835 x 2.729835, not incorporating fit results
[Tue Aug 21 16:30:44 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 16:30:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 16:30:44 2012] Assessing source extent using major
[Tue Aug 21 16:30:44 2012] Source does appear to be extended
[Tue Aug 21 16:30:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 16:30:44 2012] Source is confused with source 16
[Tue Aug 21 18:04:15 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 18:04:15 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Aug 21 18:04:15 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Tue Aug 21 18:04:15 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.44"
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src9.ximg exists
[Tue Aug 21 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src9.csv
[Tue Aug 21 19:53:55 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Aug 21 19:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src9.csv
[Tue Aug 21 19:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:53:56 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Aug 21 19:53:56 2012] fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Aug 21 19:53:56 2012] Fit fullrun_mos1_xmm0084100501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Aug 21 21:08:27 2012] Spatial fit model total counts = 12115.400000, observed total counts = 12115.000000
[Tue Aug 21 21:08:27 2012] Offset between fit and detection position for source 17 = 3.851783 pixels
[Tue Aug 21 21:08:27 2012] Warning, changing simple spatial fit ID from 9 to 8
[Tue Aug 21 21:08:27 2012] 12062.260000 total counts/ 7553.140000 bgd. counts: snr = 51.883352
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 3.851783 pixels
  Position = (309.4, 268.5) = 19 11 1.38 9 5 33.7
  Extent = 29.8 (29.7-59.6)", rotation angle = 0
  Source counts = 4509.1 +/- 109.8
  Background counts = 7553.1
  Rate = 0.2 +/- 0.006
[Tue Aug 21 21:08:27 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:08:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:08:27 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 21:08:27 2012] Source does appear to be extended
[Tue Aug 21 21:08:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 03:33:04 2012] Counts = 4509.120000, rescaling region sizes by 2.000000
[Wed Aug 22 03:33:04 2012] XMMSAS src. selection expression = ellipse(26871.578000, 23312.220000, 3573.480103, 3573.480103, 0.000000, X, Y)
[Wed Aug 22 03:33:04 2012] Writing source region out to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src17_src.reg
[Wed Aug 22 03:33:04 2012] Extracting stamp from image fullrun_mos1_xmm0084100501_pi300-10000_cl_sm2.00.img.gz, (104, 63) - (515, 474)
[Wed Aug 22 03:33:04 2012] XMMSAS bgd. selection expression = annulus(26871.578000, 23312.220000, 11911.600343, 23823.200686, X, Y) && !ellipse(32110.169000, 36502.731000, 454.811213, 454.811213, 0.000000, X, Y) && !ellipse(24090.250200, 24374.428000, 1018.808029, 1018.808029, 0.000000, X, Y) && !ellipse(24862.958000, 24527.748000, 1816.792052, 1816.792052, 0.000000, X, Y) && !ellipse(25989.526800, 25194.659160, 1083.424031, 909.384026, 359.998000, X, Y) && !ellipse(23700.228600, 22775.692000, 1265.184036, 1265.184036, 0.000000, X, Y) && !ellipse(23273.982000, 23623.368000, 1265.184036, 1265.184036, 0.000000, X, Y) && !ellipse(23631.998352, 23198.461273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.756000, 24008.734000, 1191.160034, 1191.160034, 0.000000, X, Y) && !ellipse(23255.182000, 23896.188000, 1531.216044, 1531.216044, 0.000000, X, Y) && !ellipse(23215.010071, 23017.759979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25337.411400, 23201.624000, 1260.248036, 1260.248036, 0.000000, X, Y) && !ellipse(11700.310600, 21943.991400, 501.447214, 501.447214, 0.000000, X, Y) && !ellipse(26854.152527, 8014.130348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.394000, 21775.344000, 1286.608037, 1286.608037, 0.000000, X, Y) && !ellipse(25112.397552, 26135.566193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.809509, 22473.184265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25866.311707, 22456.818665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23587.236000, 25445.226000, 1212.552035, 1212.552035, 0.000000, X, Y)
[Wed Aug 22 03:33:04 2012] Writing fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src17.gif
[Wed Aug 22 04:05:03 2012] Mean detx,y = (531.11, -999.23) 
[Wed Aug 22 04:05:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 04:16:15 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 04:16:16 2012] Setting source spectrum file to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Aug 22 04:16:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Aug 22 10:26:40 2012] Updating aperture counts using extracted products
[Wed Aug 22 10:26:40 2012] Error reading totcts from fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Aug 22 10:26:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 10:26:41 2012] Using photon index=1.80, rate=0.242, arf fullrun_mos1_xmm0084100501_pi300-10000_pass1_cl_src17.arf
[Wed Aug 22 10:26:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 10:26:41 2012] Updating source flux to 2.2e-12
[Wed Aug 22 10:26:45 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Wed Aug 22 10:26:45 2012] Flag c found in src. 17 procflags, skipping spectral fitting