[Tue Jul  3 10:54:34 2012] Detection parameters:
  Position = (277.9, 279.9) = 19 11 10.53 9 6 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7125.1 +/- 106.7
  Background counts = 171.4
  Rate = 0.5 +/- 0.007

[Tue Jul  3 10:54:34 2012] Off-axis axis estimate = 2.00'
[Tue Jul  3 10:56:54 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 10:56:54 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Tue Jul  3 10:56:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.820
[Tue Jul  3 10:56:54 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.43"
[Tue Jul  3 11:51:02 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jul  3 11:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src11.csv
[Tue Jul  3 11:51:02 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jul  3 11:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src11.csv
[Tue Jul  3 11:51:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 11:51:02 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jul  3 11:51:02 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jul  3 11:51:02 2012] Fit fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jul  3 13:31:32 2012] Spatial fit model total counts = 24972.000000, observed total counts = 24953.000000
[Tue Jul  3 13:31:32 2012] Offset between fit and detection position for source 12 = 0.347594 pixels
[Tue Jul  3 13:31:32 2012] 23791.370000 total counts/ 16314.100000 bgd. counts: snr = 58.541184
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.347594 pixels
  Position = (278.2, 280.2) = 19 11 10.45 9 6 25.7
  Extent = 14.9 (14.8-29.7)", rotation angle = 0
  Source counts = 7477.3 +/- 154.2
  Background counts = 16314.1
  Rate = 0.4 +/- 0.009
[Tue Jul  3 13:31:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 13:31:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 13:31:32 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 13:31:32 2012] Source does appear to be extended
[Tue Jul  3 13:31:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 13:31:32 2012] Source is confused with source 11
[Tue Jul  3 13:31:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 13:31:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 13:31:47 2012] Initial guess for spatial extent in simple fitting = 14.86"
[Tue Jul  3 13:31:47 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.043
[Tue Jul  3 13:31:47 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.86"
[Tue Jul  3 17:54:10 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jul  3 17:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src6.csv
[Tue Jul  3 17:54:10 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jul  3 17:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src6.csv
[Tue Jul  3 17:54:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 17:54:10 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jul  3 17:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jul  3 17:54:10 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jul  3 17:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jul  3 17:54:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 19:21:27 2012] Warning, spatial fit 6 centroid is now closest to src. 15
[Tue Jul  3 19:21:27 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 19:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 19:21:27 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 19:21:27 2012] Source does appear to be extended
[Tue Jul  3 19:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 19:21:38 2012] Counts = 7477.270000, rescaling region sizes by 2.000000
[Tue Jul  3 19:21:38 2012] XMMSAS src. selection expression = ellipse(24151.859900, 24325.462200, 1783.332051, 1783.332051, 0.000000, X, Y)
[Tue Jul  3 19:21:38 2012] Writing source region out to fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src12_src.reg
[Tue Jul  3 19:21:38 2012] Extracting stamp from image fullrun_pn_xmm0084100401_pi300-10000_cl_sm2.00.img.gz, (176, 178) - (381, 383)
[Tue Jul  3 19:21:38 2012] XMMSAS bgd. selection expression = annulus(24151.859900, 24325.462200, 5944.440171, 11888.880342, X, Y) && !ellipse(32129.548360, 36394.469200, 542.076016, 542.076016, 0.000000, X, Y) && !ellipse(24698.854000, 26734.204000, 1092.416031, 1092.416031, 0.000000, X, Y) && !ellipse(27233.468597, 25252.110504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.106200, 25104.914400, 1502.184043, 1502.184043, 0.000000, X, Y) && !ellipse(27292.718000, 24934.232000, 1046.760030, 1046.760030, 0.000000, X, Y) && !ellipse(24549.958000, 24297.011600, 1153.360033, 1153.360033, 0.000000, X, Y) && !ellipse(27266.664429, 23644.572571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24415.497498, 22961.760101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24895.388733, 22965.567413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.442688, 22890.743378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25700.829041, 22879.945374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23568.261719, 22839.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11679.487025, 21889.853170, 594.827094, 424.241852, 90.000000, X, Y) && !ellipse(24214.817108, 22317.801331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.255371, 18827.392288, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 19:21:38 2012] Writing fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src12.gif
[Tue Jul  3 19:32:34 2012] Mean detx,y = (385.21, -328.31) 
[Tue Jul  3 19:32:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 19:35:22 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 19:35:23 2012] Setting source spectrum file to fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jul  3 19:35:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jul  4 15:30:24 2012] Updating aperture counts using extracted products
[Wed Jul  4 15:30:24 2012] Error reading totcts from fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul  4 15:30:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 15:30:24 2012] Using photon index=1.80, rate=0.449, arf fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src12.arf
[Wed Jul  4 15:30:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 15:30:24 2012] Updating source flux to 1e-12
[Wed Jul  4 15:38:45 2012] Flag c found in src. 12 procflags, skipping spectral fitting