[Tue Jul  3 10:54:34 2012] Detection parameters:
  Position = (285.9, 280.9) = 19 11 8.17 9 6 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7196.0 +/- 105.2
  Background counts = 166.9
  Rate = 0.5 +/- 0.007

[Tue Jul  3 10:54:34 2012] Off-axis axis estimate = 1.56'
[Tue Jul  3 10:56:54 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 10:56:54 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Tue Jul  3 10:56:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Tue Jul  3 10:56:54 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.21"
[Tue Jul  3 11:51:02 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jul  3 11:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src10.csv
[Tue Jul  3 11:51:02 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jul  3 11:51:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src10.csv
[Tue Jul  3 11:51:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 11:51:02 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jul  3 11:51:02 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jul  3 11:51:02 2012] Fit fullrun_pn_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Jul  3 13:31:32 2012] Spatial fit model total counts = 26087.500000, observed total counts = 26065.000000
[Tue Jul  3 13:31:32 2012] Offset between fit and detection position for source 11 = 3.374017 pixels
[Tue Jul  3 13:31:32 2012] 25459.280000 total counts/ 19554.200000 bgd. counts: snr = 42.228510
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.374017 pixels
  Position = (282.7, 279.8) = 19 11 9.11 9 6 24.3
  Extent = 14.4 (14.3-28.8)", rotation angle = 0
  Source counts = 5905.1 +/- 159.6
  Background counts = 19554.2
  Rate = 0.4 +/- 0.01
[Tue Jul  3 13:31:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 13:31:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 13:31:32 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 13:31:32 2012] Source does appear to be extended
[Tue Jul  3 13:31:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 13:31:32 2012] Source is confused with source 12
[Tue Jul  3 13:31:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 13:31:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 13:31:47 2012] Initial guess for spatial extent in simple fitting = 14.42"
[Tue Jul  3 13:31:47 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.100
[Tue Jul  3 13:31:47 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.42"
[Tue Jul  3 17:54:10 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jul  3 17:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src5.csv
[Tue Jul  3 17:54:10 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jul  3 17:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src5.csv
[Tue Jul  3 17:54:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 17:54:10 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jul  3 17:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jul  3 17:54:10 2012] fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jul  3 17:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jul  3 17:54:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 19:21:27 2012] Warning, spatial fit 5 centroid is now closest to src. 18
[Tue Jul  3 19:21:27 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 19:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 19:21:27 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 19:21:27 2012] Source does appear to be extended
[Tue Jul  3 19:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 19:21:38 2012] Counts = 5905.080000, rescaling region sizes by 2.000000
[Tue Jul  3 19:21:38 2012] XMMSAS src. selection expression = ellipse(24549.958000, 24297.011600, 1730.040050, 1730.040050, 0.000000, X, Y)
[Tue Jul  3 19:21:38 2012] Writing source region out to fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src11_src.reg
[Tue Jul  3 19:21:38 2012] Extracting stamp from image fullrun_pn_xmm0084100401_pi300-10000_cl_sm2.00.img.gz, (183, 180) - (382, 379)
[Tue Jul  3 19:21:38 2012] XMMSAS bgd. selection expression = annulus(24549.958000, 24297.011600, 5766.800166, 11533.600332, X, Y) && !ellipse(24698.854000, 26734.204000, 1092.416031, 1092.416031, 0.000000, X, Y) && !ellipse(27233.468597, 25252.110504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.106200, 25104.914400, 1502.184043, 1502.184043, 0.000000, X, Y) && !ellipse(27292.718000, 24934.232000, 1046.760030, 1046.760030, 0.000000, X, Y) && !ellipse(24151.859900, 24325.462200, 1188.888034, 1188.888034, 0.000000, X, Y) && !ellipse(27266.664429, 23644.572571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24415.497498, 22961.760101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24895.388733, 22965.567413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.442688, 22890.743378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25700.829041, 22879.945374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23568.261719, 22839.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24214.817108, 22317.801331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27611.255371, 18827.392288, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 19:21:38 2012] Writing fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src11.gif
[Tue Jul  3 19:29:38 2012] Mean detx,y = (108.64, -252.66) 
[Tue Jul  3 19:29:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 19:32:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 19:32:19 2012] Setting source spectrum file to fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jul  3 19:32:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jul  4 15:30:24 2012] Updating aperture counts using extracted products
[Wed Jul  4 15:30:24 2012] Error reading totcts from fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jul  4 15:30:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 15:30:24 2012] Using photon index=1.80, rate=0.355, arf fullrun_pn_xmm0084100401_pi300-10000_pass1_cl_src11.arf
[Wed Jul  4 15:30:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 15:30:24 2012] Updating source flux to 8.1e-13
[Wed Jul  4 15:38:45 2012] Flag c found in src. 11 procflags, skipping spectral fitting