[Tue Jul  3 10:55:16 2012] Detection parameters:
  Position = (270.5, 266.0) = 19 11 12.70 9 5 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1472.8 +/- 49.3
  Background counts = 73.2
  Rate = 0.09 +/- 0.003

[Tue Jul  3 10:55:16 2012] Off-axis axis estimate = 3.10'
[Tue Jul  3 12:43:35 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 12:43:35 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Tue Jul  3 12:43:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.918
[Tue Jul  3 12:43:35 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.98"
[Tue Jul  3 13:31:27 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jul  3 13:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src6.csv
[Tue Jul  3 13:31:27 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jul  3 13:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src6.csv
[Tue Jul  3 13:31:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 13:31:27 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jul  3 13:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jul  3 13:31:27 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jul  3 13:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jul  3 13:31:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 13:31:40 2012] Spatial fit model total counts = 8016.740000, observed total counts = 6664.000000
[Tue Jul  3 13:31:40 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 13:31:40 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 13:31:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 13:31:40 2012] Assessing source extent using major
[Tue Jul  3 13:31:40 2012] Source does appear to be extended
[Tue Jul  3 13:31:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 18:36:21 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 18:36:21 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Tue Jul  3 18:36:21 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.918
[Tue Jul  3 18:36:21 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.98"
[Tue Jul  3 19:21:24 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jul  3 19:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src6.csv
[Tue Jul  3 19:21:24 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jul  3 19:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src6.csv
[Tue Jul  3 19:21:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 19:21:24 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jul  3 19:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jul  3 19:21:24 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jul  3 19:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jul  3 19:21:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 19:21:32 2012] Source 13 is offset by -7.567325 and -3.878293 pixels which is larger than
2 X fitted extent = 0.884924 x 0.884924, not incorporating fit results
[Tue Jul  3 19:21:32 2012] Spatial fit model total counts = 7899.360000, observed total counts = 6664.000000
[Tue Jul  3 19:21:32 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 19:21:32 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.561871 pixels away
[Tue Jul  3 19:21:32 2012] Spatial fit model total counts = 5571.690000, observed total counts = 4790.000000
[Tue Jul  3 19:21:32 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 19:21:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 19:21:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 19:21:32 2012] Assessing source extent using major
[Tue Jul  3 19:21:32 2012] Source does appear to be extended
[Tue Jul  3 19:21:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 19:21:32 2012] Source is confused with source 11
[Tue Jul  3 19:21:32 2012] Source is confused with source 12
[Wed Jul  4 07:54:07 2012] Counts = 1472.792480, rescaling region sizes by 2.000000
[Wed Jul  4 07:54:07 2012] XMMSAS src. selection expression = ellipse(23486.048737, 23097.182526, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul  4 07:54:07 2012] Writing source region out to fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src13_src.reg
[Wed Jul  4 07:54:07 2012] Extracting stamp from image fullrun_mos2_xmm0084100401_pi300-10000_cl_sm2.00.img.gz, (196, 191) - (346, 341)
[Wed Jul  4 07:54:07 2012] XMMSAS bgd. selection expression = annulus(23486.048737, 23097.182526, 4350.000000, 8700.000000, X, Y) && !ellipse(25278.486000, 24464.746800, 1152.056033, 1152.056033, 0.000000, X, Y) && !ellipse(24570.332000, 24356.359800, 1181.704034, 1181.704034, 0.000000, X, Y) && !ellipse(25817.734600, 25191.210600, 1078.048031, 1078.048031, 0.000000, X, Y) && !ellipse(23958.180000, 24227.258000, 7090.224204, 7090.224204, 0.000000, X, Y) && !ellipse(23423.554000, 23774.266000, 2049.000059, 2049.000059, 0.000000, X, Y) && !ellipse(26955.514460, 23457.502000, 1341.184039, 1341.184039, 0.000000, X, Y) && !ellipse(24342.368000, 21903.558000, 1251.912036, 1251.912036, 58.824000, X, Y) && !ellipse(23042.768000, 24179.848000, 1251.912036, 1251.912036, 0.000000, X, Y) && !ellipse(25594.726105, 23095.947937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.857727, 22931.405151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26946.785200, 22365.088000, 1029.032030, 1029.032030, 0.000000, X, Y) && !ellipse(24765.402000, 26761.474000, 1087.592031, 1087.592031, 0.000000, X, Y) && !ellipse(23233.322000, 26864.052000, 1184.552034, 1184.552034, 0.000000, X, Y)
[Wed Jul  4 07:54:07 2012] Writing fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src13.gif
[Wed Jul  4 08:05:05 2012] Mean detx,y = (-822.94, 1138.69) 
[Wed Jul  4 08:05:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 08:06:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 08:06:39 2012] Setting source spectrum file to fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jul  4 08:06:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jul  4 12:58:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul  4 12:58:44 2012] rmf not generated due to insufficient counts
[Wed Jul  4 15:30:25 2012] Updating aperture counts using extracted products
[Wed Jul  4 15:30:25 2012] Error reading totcts from fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jul  4 15:30:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 15:30:25 2012] Using photon index=1.80, rate=0.0875, arf fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src13.arf
[Wed Jul  4 15:30:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 15:30:25 2012] Updating source flux to 8.3e-13
[Wed Jul  4 15:34:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting