[Tue Jul 3 10:55:15 2012] Detection parameters: Position = (286.0, 280.9) = 19 11 8.16 9 6 29.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 3092.9 +/- 69.7 Background counts = 80.5 Rate = 0.2 +/- 0.004 [Tue Jul 3 10:55:16 2012] Off-axis axis estimate = 1.56' [Tue Jul 3 12:43:35 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting [Tue Jul 3 12:43:35 2012] Initial guess for spatial extent in simple fitting = 7.21" [Tue Jul 3 12:43:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860 [Tue Jul 3 12:43:35 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.21" [Tue Jul 3 13:31:27 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src2.ximg exists [Tue Jul 3 13:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src2.csv [Tue Jul 3 13:31:27 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src2_1.ximg exists [Tue Jul 3 13:31:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src2.csv [Tue Jul 3 13:31:27 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 3 13:31:27 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Tue Jul 3 13:31:27 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Tue Jul 3 13:31:27 2012] Fit fullrun_mos2_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Tue Jul 3 13:31:40 2012] Warning, spatial fit 2 centroid is now closest to src. 2 [Tue Jul 3 13:31:40 2012] Source 1 is offset by -3.384038 and 6.920042 pixels which is larger than 2 X fitted extent = 6.998575 x 2.288768, not incorporating fit results [Tue Jul 3 13:31:40 2012] Source 1 is offset by 2.942008 and 9.003744 pixels which is larger than 2 X fitted extent = 1.369876 x 1.369876, not incorporating fit results [Tue Jul 3 13:31:40 2012] Vigneting correction estimate = 1.000000 [Tue Jul 3 13:31:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jul 3 13:31:40 2012] Assessing source extent using major [Tue Jul 3 13:31:40 2012] Source does appear to be extended [Tue Jul 3 13:31:40 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jul 3 13:31:40 2012] Source is confused with source 2 [Tue Jul 3 18:36:21 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting [Tue Jul 3 18:36:21 2012] Initial guess for spatial extent in simple fitting = 7.21" [Tue Jul 3 18:36:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860 [Tue Jul 3 18:36:21 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.21" [Tue Jul 3 19:21:24 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src2.ximg exists [Tue Jul 3 19:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src2.csv [Tue Jul 3 19:21:24 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src2_1.ximg exists [Tue Jul 3 19:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src2.csv [Tue Jul 3 19:21:24 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 3 19:21:24 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Tue Jul 3 19:21:24 2012] fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Tue Jul 3 19:21:24 2012] Fit fullrun_mos2_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Tue Jul 3 19:21:32 2012] Spatial fit model total counts = 11569.800000, observed total counts = 11320.000000 [Tue Jul 3 19:21:32 2012] Offset between fit and detection position for source 1 = 5.227032 pixels [Tue Jul 3 19:21:32 2012] 8674.020000 total counts/ 6965.010000 bgd. counts: snr = 20.477820 Spatial fit parameters: Offset between fit and detection position for source 1 = 5.227032 pixels Position = (291.1, 281.8) = 19 11 6.65 9 6 32.7 Extent = 14.4 (14.4-14.4)", rotation angle = 0 Source counts = 1709.0 +/- 93.1 Background counts = 6965.0 Rate = 0.09 +/- 0.005 [Tue Jul 3 19:21:32 2012] Vigneting correction estimate = 1.000000 [Tue Jul 3 19:21:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jul 3 19:21:32 2012] Assessing source extent using major axis lower bound [Tue Jul 3 19:21:32 2012] Source does appear to be extended [Tue Jul 3 19:21:32 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jul 4 07:54:07 2012] Counts = 1709.010000, rescaling region sizes by 2.000000 [Wed Jul 4 07:54:07 2012] XMMSAS src. selection expression = ellipse(25278.486000, 24464.746800, 1728.084050, 1728.084050, 0.000000, X, Y) [Wed Jul 4 07:54:07 2012] Writing source region out to fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1_src.reg [Wed Jul 4 07:54:07 2012] Extracting stamp from image fullrun_mos2_xmm0084100401_pi300-10000_cl_sm2.00.img.gz, (192, 182) - (390, 381) [Wed Jul 4 07:54:07 2012] XMMSAS bgd. selection expression = annulus(25278.486000, 24464.746800, 5760.280166, 11520.560332, X, Y) && !ellipse(32169.481354, 36390.080536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.332000, 24356.359800, 1181.704034, 1181.704034, 0.000000, X, Y) && !ellipse(25817.734600, 25191.210600, 1078.048031, 1078.048031, 0.000000, X, Y) && !ellipse(23958.180000, 24227.258000, 7090.224204, 7090.224204, 0.000000, X, Y) && !ellipse(23486.048737, 23097.182526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23423.554000, 23774.266000, 2049.000059, 2049.000059, 0.000000, X, Y) && !ellipse(26955.514460, 23457.502000, 1341.184039, 1341.184039, 0.000000, X, Y) && !ellipse(24342.368000, 21903.558000, 1251.912036, 1251.912036, 58.824000, X, Y) && !ellipse(23042.768000, 24179.848000, 1251.912036, 1251.912036, 0.000000, X, Y) && !ellipse(25594.726105, 23095.947937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25068.857727, 22931.405151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26946.785200, 22365.088000, 1029.032030, 1029.032030, 0.000000, X, Y) && !ellipse(24765.402000, 26761.474000, 1087.592031, 1087.592031, 0.000000, X, Y) && !ellipse(23233.322000, 26864.052000, 1184.552034, 1184.552034, 0.000000, X, Y) [Wed Jul 4 07:54:07 2012] Writing fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1.gif [Wed Jul 4 07:55:52 2012] Mean detx,y = (663.59, -62.72) [Wed Jul 4 07:55:53 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jul 4 07:59:11 2012] Binned source spectrum to 10 counts/bin [Wed Jul 4 07:59:11 2012] Setting source spectrum file to fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Jul 4 07:59:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Jul 4 15:30:25 2012] Updating aperture counts using extracted products [Wed Jul 4 15:30:25 2012] Error reading totcts from fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Wed Jul 4 15:30:25 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jul 4 15:30:25 2012] Using photon index=1.80, rate=0.0925, arf fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1.arf [Wed Jul 4 15:30:25 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jul 4 15:30:25 2012] Updating source flux to 8.4e-13 [Wed Jul 4 15:34:29 2012] Flag b found in src. 1 procflags, skipping spectral fitting [Wed Jul 4 15:34:29 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Wed Jul 4 15:38:45 2012] Reading fit data from xmm0084100401/analysis//spectral/fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1_pl.csv [Wed Jul 4 15:38:45 2012] Spectral fit parameter nH value = 4.8515e+22 [Wed Jul 4 15:38:45 2012] Spectral fit parameter PhoIndex value = 3.58338 [Wed Jul 4 15:38:45 2012] Failed to get F(0.3-8.0) from xmm0084100401/analysis//spectral/fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Wed Jul 4 15:38:45 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jul 4 15:38:45 2012] Using Nh = 4.9e+22, photon index=3.58, rate=0.0925, arf fullrun_mos2_xmm0084100401_pi300-10000_pass1_cl_src1.arf [Wed Jul 4 15:38:45 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jul 4 15:38:45 2012] Updating source flux to 1.5e-12