[Tue Jul  3 10:54:55 2012] Detection parameters:
  Position = (277.2, 280.0) = 19 11 10.75 9 6 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3212.7 +/- 71.9
  Background counts = 81.2
  Rate = 0.2 +/- 0.004

[Tue Jul  3 10:54:55 2012] Off-axis axis estimate = 2.04'
[Tue Jul  3 11:51:02 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 11:51:02 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Tue Jul  3 11:51:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Tue Jul  3 11:51:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.45"
[Tue Jul  3 12:43:34 2012] fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  3 12:43:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 12:43:34 2012] fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  3 12:43:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 12:43:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 12:43:35 2012] fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  3 12:43:35 2012] fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  3 12:43:35 2012] Fit fullrun_mos1_xmm0084100401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul  3 13:31:36 2012] Spatial fit model total counts = 10722.700000, observed total counts = 10725.000000
[Tue Jul  3 13:31:36 2012] Offset between fit and detection position for source 2 = 1.235983 pixels
[Tue Jul  3 13:31:36 2012] 10309.300000 total counts/ 7013.660000 bgd. counts: snr = 39.352054
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.235983 pixels
  Position = (278.3, 280.4) = 19 11 10.41 9 6 26.8
  Extent = 14.9 (14.9-29.8)", rotation angle = 0
  Source counts = 3295.6 +/- 101.5
  Background counts = 7013.7
  Rate = 0.2 +/- 0.006
[Tue Jul  3 13:31:36 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 13:31:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 13:31:36 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 13:31:36 2012] Source does appear to be extended
[Tue Jul  3 13:31:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 13:31:36 2012] Source is confused with source 1
[Tue Jul  3 13:31:36 2012] Source is confused with source 12
[Tue Jul  3 17:54:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 17:54:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 17:54:10 2012] Initial guess for spatial extent in simple fitting = 14.90"
[Tue Jul  3 17:54:10 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.038
[Tue Jul  3 17:54:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.90"
[Tue Jul  3 18:36:20 2012] fullrun_mos1_xmm0084100401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul  3 18:36:20 2012] fullrun_mos1_xmm0084100401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul  3 18:36:20 2012] Fit fullrun_mos1_xmm0084100401_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jul  3 18:36:20 2012] fullrun_mos1_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul  3 18:36:20 2012] fullrun_mos1_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul  3 18:36:20 2012] Fit fullrun_mos1_xmm0084100401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul  3 19:21:29 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Tue Jul  3 19:21:29 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 19:21:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 19:21:29 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 19:21:29 2012] Source does appear to be extended
[Tue Jul  3 19:21:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 05:54:20 2012] Counts = 3295.640000, rescaling region sizes by 2.000000
[Wed Jul  4 05:54:20 2012] XMMSAS src. selection expression = ellipse(24164.357400, 24348.258000, 1787.988051, 1787.988051, 0.000000, X, Y)
[Wed Jul  4 05:54:20 2012] Writing source region out to fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul  4 05:54:20 2012] Extracting stamp from image fullrun_mos1_xmm0084100401_pi300-10000_cl_sm2.00.img.gz, (176, 178) - (381, 383)
[Wed Jul  4 05:54:20 2012] XMMSAS bgd. selection expression = annulus(24164.357400, 24348.258000, 5959.960171, 11919.920343, X, Y) && !ellipse(24844.528000, 24338.242000, 1129.600033, 1129.600033, 0.000000, X, Y) && !ellipse(25902.263800, 25169.144400, 1301.544037, 1301.544037, 0.000000, X, Y) && !ellipse(25421.087189, 24483.025513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23508.242649, 23275.665439, 1269.336037, 847.771462, 52.905446, X, Y) && !ellipse(23696.350000, 22450.072000, 742.951221, 742.951221, 0.000000, X, Y) && !ellipse(23204.484000, 23510.992000, 1242.064036, 1242.064036, 0.000000, X, Y) && !ellipse(32097.901764, 36494.303711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26843.352000, 23312.646000, 1191.920034, 1191.920034, 0.000000, X, Y) && !ellipse(25735.327118, 22991.939450, 1095.424032, 643.349351, -0.000000, X, Y) && !ellipse(26913.481000, 22815.898000, 1276.688037, 1276.688037, 0.000000, X, Y) && !ellipse(26935.670200, 22344.714400, 914.576026, 914.576026, 0.000000, X, Y) && !ellipse(24869.528000, 21940.660000, 1261.680036, 1261.680036, 0.000000, X, Y) && !ellipse(32435.940094, 36211.115631, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 05:54:20 2012] Writing fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2.gif
[Wed Jul  4 05:54:23 2012] Mean detx,y = (460.60, 75.46) 
[Wed Jul  4 05:54:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 05:57:38 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 05:57:38 2012] Setting source spectrum file to fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul  4 05:57:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul  4 15:30:25 2012] Updating aperture counts using extracted products
[Wed Jul  4 15:30:25 2012] Error reading totcts from fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul  4 15:30:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 15:30:25 2012] Using photon index=1.80, rate=0.179, arf fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2.arf
[Wed Jul  4 15:30:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 15:30:25 2012] Updating source flux to 1.6e-12
[Wed Jul  4 15:30:26 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Jul  4 15:34:29 2012] Reading fit data from xmm0084100401/analysis//spectral/fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jul  4 15:34:29 2012] Spectral fit parameter nH value = 4.54817e+22
[Wed Jul  4 15:34:29 2012] Spectral fit parameter PhoIndex value = 3.39706
[Wed Jul  4 15:34:29 2012] Failed to get F(0.3-8.0) from xmm0084100401/analysis//spectral/fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 15:34:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 15:34:29 2012] Using Nh = 4.5e+22, photon index=3.40, rate=0.179, arf fullrun_mos1_xmm0084100401_pi300-10000_pass1_cl_src2.arf
[Wed Jul  4 15:34:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 15:34:29 2012] Updating source flux to 2.8e-12