[Sat Jul 14 18:27:20 2012] Detection parameters:
  Position = (281.0, 273.0) = 17 30 43.69 -21 29 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82712.8 +/- 338.6
  Background counts = 253.1
  Rate = 3 +/- 0.01

[Sat Jul 14 18:27:21 2012] Off-axis axis estimate = 2.24'
[Sat Jul 14 18:35:03 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 18:35:03 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Sat Jul 14 18:35:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Sat Jul 14 18:35:03 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.55"
[Sat Jul 14 23:02:14 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jul 14 23:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src6.csv
[Sat Jul 14 23:02:15 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jul 14 23:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src6.csv
[Sat Jul 14 23:02:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 23:02:15 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jul 14 23:02:15 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jul 14 23:02:15 2012] Fit fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Jul 15 17:36:03 2012] Spatial fit model total counts = 190844.000000, observed total counts = 201230.000000
[Sun Jul 15 17:36:03 2012] Offset between fit and detection position for source 8 = 0.462500 pixels
[Sun Jul 15 17:36:03 2012] 189877.000000 total counts/ 25600.000000 bgd. counts: snr = 1026.731250
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.462500 pixels
  Position = (281.4, 273.0) = 17 30 43.54 -21 29 45.9
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source counts = 164277.0 +/- 435.7
  Background counts = 25600.0
  Rate = 6 +/- 0.01
[Sun Jul 15 17:36:03 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:03 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 17:36:03 2012] Source does appear to be extended
[Sun Jul 15 17:36:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 17:36:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 15 17:36:23 2012] Initial guess for spatial extent in simple fitting = 15.10"
[Sun Jul 15 17:36:23 2012] source mask rpix=3.5, npix_max = 63, mask sum = 56, frac = 0.888
[Sun Jul 15 17:36:23 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 15.10"
[Mon Jul 16 04:03:18 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jul 16 04:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src6.csv
[Mon Jul 16 04:03:18 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jul 16 04:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src6.csv
[Mon Jul 16 04:03:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 04:03:19 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jul 16 04:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jul 16 04:03:19 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jul 16 04:03:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jul 16 04:03:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:48:39 2012] Warning, spatial fit 6 centroid is now closest to src. 5
[Mon Jul 23 13:48:39 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:39 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:48:39 2012] Source does appear to be extended
[Mon Jul 23 13:48:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:48:52 2012] Counts = 164277.000000, rescaling region sizes by 3.000000
[Mon Jul 23 13:48:52 2012] XMMSAS src. selection expression = ellipse(24435.280000, 23699.773600, 2717.136078, 2717.136078, 0.000000, X, Y)
[Mon Jul 23 13:48:52 2012] Writing source region out to fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src8_src.reg
[Mon Jul 23 13:48:52 2012] Extracting stamp from image fullrun_pn_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (125, 117) - (438, 429)
[Mon Jul 23 13:48:52 2012] XMMSAS bgd. selection expression = annulus(24435.280000, 23699.773600, 13585.680391, 27171.360782, X, Y) && !ellipse(24472.373960, 25610.252600, 3372.024097, 3372.024097, 0.000000, X, Y) && !ellipse(26349.446260, 25012.267800, 6463.104186, 3078.768089, 59.721700, X, Y) && !ellipse(27411.814880, 25009.395691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22773.114960, 17966.353012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25581.313600, 24526.986000, 3436.464099, 3436.464099, 0.000000, X, Y) && !ellipse(27401.754974, 24483.710510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26589.919201, 24091.986000, 3436.464099, 3436.464099, 298.835000, X, Y) && !ellipse(26406.927000, 23099.175400, 3694.008106, 3694.008106, 0.000000, X, Y) && !ellipse(24066.281494, 22698.909546, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25400.322205, 26987.904938, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(24972.136000, 25581.591200, 6744.048194, 6744.048194, 0.000000, X, Y) && !ellipse(28804.706970, 21375.356201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.541560, 18949.466800, 433.595212, 347.588010, 329.783071, X, Y) && !ellipse(12263.290344, 18764.829178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16149.974457, 28482.989105, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:48:52 2012] Writing fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src8.gif
[Mon Jul 23 14:37:25 2012] Mean detx,y = (-230.61, 258.17) 
[Mon Jul 23 14:37:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 14:45:20 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 14:45:21 2012] Setting source spectrum file to fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jul 23 14:45:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jul 27 04:31:50 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:50 2012] Error reading totcts from fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jul 27 04:31:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:51 2012] Using photon index=1.80, rate=5.51, arf fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src8.arf
[Fri Jul 27 04:31:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:51 2012] Updating source flux to 1.6e-11