[Sat Jul 14 18:27:20 2012] Detection parameters:
  Position = (292.5, 310.8) = 17 30 40.08 -21 27 6.6
  Extent = 43.5" x 43.5", rotation angle = 0 degrees
  Source counts = 1325.0 +/- 72.7
  Background counts = 3887.6
  Rate = 0.05 +/- 0.003

[Sat Jul 14 18:27:21 2012] Off-axis axis estimate = 0.99'
[Sat Jul 14 18:35:03 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 18:35:03 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Sat Jul 14 18:35:03 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.143
[Sat Jul 14 18:35:03 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 6.92"
[Sat Jul 14 23:02:15 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jul 14 23:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src9.csv
[Sat Jul 14 23:02:15 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jul 14 23:02:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src9.csv
[Sat Jul 14 23:02:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 23:02:15 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jul 14 23:02:15 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jul 14 23:02:15 2012] Fit fullrun_pn_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Jul 15 17:36:03 2012] Source 11 is offset by 2.224883 and 6.130448 pixels which is larger than
2 X fitted extent = 5.092460 x 5.092460, not incorporating fit results
[Sun Jul 15 17:36:03 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:03 2012] Assessing source extent using major
[Sun Jul 15 17:36:03 2012] Source does appear to be extended
[Sun Jul 15 17:36:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:03 2012] Source is confused with source 1
[Sun Jul 15 17:36:23 2012] Using EEF radius (= 6.92 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 17:36:23 2012] Initial guess for spatial extent in simple fitting = 6.92"
[Sun Jul 15 17:36:23 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.143
[Sun Jul 15 17:36:23 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.92"
[Mon Jul 16 04:03:18 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jul 16 04:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src9.csv
[Mon Jul 16 04:03:18 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jul 16 04:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src9.csv
[Mon Jul 16 04:03:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 04:03:19 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jul 16 04:03:19 2012] fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jul 16 04:03:19 2012] Fit fullrun_pn_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jul 23 13:48:39 2012] Source 11 is offset by 2.584462 and 6.130448 pixels which is larger than
2 X fitted extent = 5.309747 x 5.309747, not incorporating fit results
[Mon Jul 23 13:48:39 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.214180 pixels away
[Mon Jul 23 13:48:39 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:39 2012] Assessing source extent using major
[Mon Jul 23 13:48:39 2012] Source does appear to be extended
[Mon Jul 23 13:48:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:48:52 2012] Counts = 1324.982056, rescaling region sizes by 2.000000
[Mon Jul 23 13:48:52 2012] XMMSAS src. selection expression = ellipse(25400.322205, 26987.904938, 5220.000000, 5220.000000, 0.000000, X, Y)
[Mon Jul 23 13:48:52 2012] Writing source region out to fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src11_src.reg
[Mon Jul 23 13:48:52 2012] Extracting stamp from image fullrun_pn_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (0, 11) - (593, 595)
[Mon Jul 23 13:48:52 2012] XMMSAS bgd. selection expression = annulus(25400.322205, 26987.904938, 17400.000000, 34800.000000, X, Y) && !ellipse(24472.373960, 25610.252600, 3372.024097, 3372.024097, 0.000000, X, Y) && !ellipse(26349.446260, 25012.267800, 6463.104186, 3078.768089, 59.721700, X, Y) && !ellipse(27411.814880, 25009.395691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22773.114960, 17966.353012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25581.313600, 24526.986000, 3436.464099, 3436.464099, 0.000000, X, Y) && !ellipse(27401.754974, 24483.710510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26589.919201, 24091.986000, 3436.464099, 3436.464099, 298.835000, X, Y) && !ellipse(24435.280000, 23699.773600, 3622.848104, 3622.848104, 0.000000, X, Y) && !ellipse(26406.927000, 23099.175400, 3694.008106, 3694.008106, 0.000000, X, Y) && !ellipse(24066.281494, 22698.909546, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24972.136000, 25581.591200, 6744.048194, 6744.048194, 0.000000, X, Y) && !ellipse(28804.706970, 21375.356201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.541560, 18949.466800, 433.595212, 347.588010, 329.783071, X, Y) && !ellipse(12263.290344, 18764.829178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16149.974457, 28482.989105, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 13:48:52 2012] Writing fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src11.gif
[Mon Jul 23 15:06:11 2012] Mean detx,y = (-298.73, 415.96) 
[Mon Jul 23 15:06:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 15:13:15 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 15:13:15 2012] Setting source spectrum file to fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul 23 15:13:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jul 24 09:12:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 09:12:08 2012] rmf not generated due to insufficient counts
[Fri Jul 27 04:31:50 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:50 2012] Error reading totcts from fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 27 04:31:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:51 2012] Using photon index=1.80, rate=0.0524, arf fullrun_pn_xmm0084100101_pi300-10000_pass1_cl_src11.arf
[Fri Jul 27 04:31:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:51 2012] Updating source flux to 1.6e-13
[Fri Jul 27 05:01:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting