[Sat Jul 14 18:28:16 2012] Detection parameters:
  Position = (288.9, 296.9) = 17 30 41.20 -21 28 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40197.3 +/- 265.2
  Background counts = 144.7
  Rate = 1 +/- 0.009

[Sat Jul 14 18:28:17 2012] Off-axis axis estimate = 0.70'
[Sun Jul 15 09:16:46 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:16:46 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Sun Jul 15 09:16:46 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Sun Jul 15 09:16:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.78"
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src3.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src3.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:36:15 2012] Warning, spatial fit 3 centroid is now closest to src. 22
[Sun Jul 15 17:36:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:15 2012] Assessing source extent using major
[Sun Jul 15 17:36:15 2012] Source does appear to be extended
[Sun Jul 15 17:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:15 2012] Source is confused with source 2
[Mon Jul 16 12:06:30 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 12:06:30 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Mon Jul 16 12:06:30 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Mon Jul 16 12:06:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.78"
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul 23 13:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src3.csv
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul 23 13:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src3.csv
[Mon Jul 23 13:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul 23 13:48:34 2012] Fit fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul 23 13:48:45 2012] Spatial fit model total counts = 135466.000000, observed total counts = 142863.000000
[Mon Jul 23 13:48:45 2012] Offset between fit and detection position for source 9 = 3.206327 pixels
[Mon Jul 23 13:48:45 2012] 109948.300000 total counts/ 25600.000000 bgd. counts: snr = 527.176875
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.206327 pixels
  Position = (292.2, 297.0) = 17 30 40.20 -21 28 1.4
  Extent = 13.6 (13.6-27.1)", rotation angle = 0
  Source counts = 84348.3 +/- 331.6
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Mon Jul 23 13:48:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:48:45 2012] Source does appear to be extended
[Mon Jul 23 13:48:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 10:11:11 2012] Counts = 84348.300000, rescaling region sizes by 3.000000
[Thu Jul 26 10:11:11 2012] XMMSAS src. selection expression = ellipse(25368.958000, 25788.824600, 2439.630070, 2439.630070, 0.000000, X, Y)
[Thu Jul 26 10:11:11 2012] Writing source region out to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src9_src.reg
[Thu Jul 26 10:11:11 2012] Extracting stamp from image fullrun_mos2_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (152, 157) - (432, 437)
[Thu Jul 26 10:11:11 2012] XMMSAS bgd. selection expression = annulus(25368.958000, 25788.824600, 12198.150351, 24396.300702, X, Y) && !ellipse(26156.216000, 25417.140000, 6872.976198, 6872.976198, 0.000000, X, Y) && !ellipse(24725.528200, 25793.696120, 3351.192096, 3351.192096, 0.000000, X, Y) && !ellipse(23791.701019, 24924.331207, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25612.570000, 24498.345000, 3436.488099, 3436.488099, 0.000000, X, Y) && !ellipse(24647.440857, 23793.599365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26659.998000, 24421.344000, 6612.816190, 6612.816190, 0.000000, X, Y) && !ellipse(23984.623413, 25556.241455, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24074.350128, 23610.906799, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16057.259506, 28403.577179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.159680, 35923.428600, 502.835214, 346.791210, 19.595126, X, Y) && !ellipse(22774.992065, 17966.589310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.505798, 18985.561676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22584.822937, 25148.490021, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 10:11:11 2012] Writing fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src9.gif
[Thu Jul 26 10:27:04 2012] Mean detx,y = (616.82, -804.04) 
[Thu Jul 26 10:27:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 10:38:49 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 10:38:50 2012] Setting source spectrum file to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 26 10:38:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jul 27 04:31:52 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:52 2012] Error reading totcts from fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jul 27 04:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:53 2012] Using photon index=1.80, rate=2.71, arf fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src9.arf
[Fri Jul 27 04:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:53 2012] Updating source flux to 2.7e-11
[Fri Jul 27 04:48:59 2012] Flag c found in src. 9 procflags, skipping spectral fitting