[Sat Jul 14 18:28:16 2012] Detection parameters:
  Position = (274.0, 287.0) = 17 30 45.85 -21 28 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23073.7 +/- 187.2
  Background counts = 139.5
  Rate = 0.8 +/- 0.007

[Sat Jul 14 18:28:17 2012] Off-axis axis estimate = 1.95'
[Sun Jul 15 09:16:46 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:16:46 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Sun Jul 15 09:16:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Sun Jul 15 09:16:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.41"
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src4.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src4.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:36:15 2012] Warning, spatial fit 4 centroid is now closest to src. 3
[Sun Jul 15 17:36:15 2012] Source 6 is offset by 6.804448 and 3.215623 pixels which is larger than
2 X fitted extent = 3.737706 x 3.737706, not incorporating fit results
[Sun Jul 15 17:36:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:15 2012] Assessing source extent using major
[Sun Jul 15 17:36:15 2012] Source does appear to be extended
[Sun Jul 15 17:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 12:06:30 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 12:06:30 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Mon Jul 16 12:06:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Mon Jul 16 12:06:30 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.41"
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jul 23 13:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src4.csv
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jul 23 13:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src4.csv
[Mon Jul 23 13:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jul 23 13:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jul 23 13:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jul 23 13:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:48:45 2012] Warning, spatial fit 4 centroid is now closest to src. 3
[Mon Jul 23 13:48:45 2012] Source 6 is offset by 6.804448 and 3.164267 pixels which is larger than
2 X fitted extent = 3.714414 x 3.714414, not incorporating fit results
[Mon Jul 23 13:48:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:45 2012] Assessing source extent using major
[Mon Jul 23 13:48:45 2012] Source does appear to be extended
[Mon Jul 23 13:48:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 10:11:11 2012] Counts = 23073.650391, rescaling region sizes by 3.000000
[Thu Jul 26 10:11:11 2012] XMMSAS src. selection expression = ellipse(23791.701019, 24924.331207, 1957.500000, 1957.500000, 0.000000, X, Y)
[Thu Jul 26 10:11:11 2012] Writing source region out to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src6_src.reg
[Thu Jul 26 10:11:11 2012] Extracting stamp from image fullrun_mos2_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (162, 175) - (387, 400)
[Thu Jul 26 10:11:11 2012] XMMSAS bgd. selection expression = annulus(23791.701019, 24924.331207, 9787.500000, 19575.000000, X, Y) && !ellipse(26156.216000, 25417.140000, 6872.976198, 6872.976198, 0.000000, X, Y) && !ellipse(24725.528200, 25793.696120, 3351.192096, 3351.192096, 0.000000, X, Y) && !ellipse(25368.958000, 25788.824600, 3252.840094, 3252.840094, 0.000000, X, Y) && !ellipse(25612.570000, 24498.345000, 3436.488099, 3436.488099, 0.000000, X, Y) && !ellipse(24647.440857, 23793.599365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26659.998000, 24421.344000, 6612.816190, 6612.816190, 0.000000, X, Y) && !ellipse(23984.623413, 25556.241455, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24074.350128, 23610.906799, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16057.259506, 28403.577179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.159680, 35923.428600, 502.835214, 346.791210, 19.595126, X, Y) && !ellipse(22774.992065, 17966.589310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.505798, 18985.561676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22584.822937, 25148.490021, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 10:11:11 2012] Writing fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src6.gif
[Thu Jul 26 10:39:17 2012] Mean detx,y = (-282.81, -729.73) 
[Thu Jul 26 10:39:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 10:50:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 10:50:18 2012] Setting source spectrum file to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul 26 10:50:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jul 26 11:57:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 11:57:18 2012] rmf not generated due to insufficient counts
[Fri Jul 27 04:31:52 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:52 2012] Error reading totcts from fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 27 04:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:53 2012] Using photon index=1.80, rate=0.803, arf fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src6.arf
[Fri Jul 27 04:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:53 2012] Updating source flux to 8.6e-12
[Fri Jul 27 04:48:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting