[Sat Jul 14 18:28:16 2012] Detection parameters:
  Position = (283.9, 274.0) = 17 30 42.78 -21 29 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21381.2 +/- 175.6
  Background counts = 140.7
  Rate = 0.7 +/- 0.006

[Sat Jul 14 18:28:17 2012] Off-axis axis estimate = 2.06'
[Sun Jul 15 09:16:46 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:16:46 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Sun Jul 15 09:16:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.714
[Sun Jul 15 09:16:46 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.46"
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src6.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src6.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:36:15 2012] Warning, spatial fit 6 centroid is now closest to src. 7
[Sun Jul 15 17:36:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:15 2012] Assessing source extent using major
[Sun Jul 15 17:36:15 2012] Source does appear to be extended
[Sun Jul 15 17:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:15 2012] Source is confused with source 7
[Mon Jul 16 12:06:30 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 12:06:30 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Mon Jul 16 12:06:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.714
[Mon Jul 16 12:06:30 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.46"
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jul 23 13:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src6.csv
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jul 23 13:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src6.csv
[Mon Jul 23 13:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:48:35 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jul 23 13:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jul 23 13:48:35 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jul 23 13:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jul 23 13:48:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:48:45 2012] Warning, spatial fit 6 centroid is now closest to src. 7
[Mon Jul 23 13:48:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:45 2012] Assessing source extent using major
[Mon Jul 23 13:48:45 2012] Source does appear to be extended
[Mon Jul 23 13:48:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 10:11:11 2012] Counts = 21381.191406, rescaling region sizes by 3.000000
[Thu Jul 26 10:11:11 2012] XMMSAS src. selection expression = ellipse(24647.440857, 23793.599365, 1957.500000, 1957.500000, 0.000000, X, Y)
[Thu Jul 26 10:11:11 2012] Writing source region out to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jul 26 10:11:11 2012] Extracting stamp from image fullrun_mos2_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (171, 162) - (396, 387)
[Thu Jul 26 10:11:11 2012] XMMSAS bgd. selection expression = annulus(24647.440857, 23793.599365, 9787.500000, 19575.000000, X, Y) && !ellipse(26156.216000, 25417.140000, 6872.976198, 6872.976198, 0.000000, X, Y) && !ellipse(24725.528200, 25793.696120, 3351.192096, 3351.192096, 0.000000, X, Y) && !ellipse(25368.958000, 25788.824600, 3252.840094, 3252.840094, 0.000000, X, Y) && !ellipse(23791.701019, 24924.331207, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25612.570000, 24498.345000, 3436.488099, 3436.488099, 0.000000, X, Y) && !ellipse(26659.998000, 24421.344000, 6612.816190, 6612.816190, 0.000000, X, Y) && !ellipse(23984.623413, 25556.241455, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24074.350128, 23610.906799, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16057.259506, 28403.577179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.159680, 35923.428600, 502.835214, 346.791210, 19.595126, X, Y) && !ellipse(22774.992065, 17966.589310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.505798, 18985.561676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22584.822937, 25148.490021, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 10:11:11 2012] Writing fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src5.gif
[Thu Jul 26 11:03:23 2012] Mean detx,y = (60.83, -76.72) 
[Thu Jul 26 11:03:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 11:15:33 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 11:15:34 2012] Setting source spectrum file to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul 26 11:15:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jul 26 12:07:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 12:07:18 2012] rmf not generated due to insufficient counts
[Fri Jul 27 04:31:52 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:52 2012] Error reading totcts from fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 27 04:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:53 2012] Using photon index=1.80, rate=0.745, arf fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src5.arf
[Fri Jul 27 04:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:53 2012] Updating source flux to 8.2e-12
[Fri Jul 27 04:48:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting