[Sat Jul 14 18:28:17 2012] Detection parameters:
  Position = (285.9, 347.7) = 17 30 42.13 -21 24 13.7
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 37.8 +/- 12.1
  Background counts = 259.7
  Rate = 0.002 +/- 0.0005

[Sat Jul 14 18:28:17 2012] Off-axis axis estimate = 3.69'
[Sun Jul 15 09:16:46 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:16:46 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Sun Jul 15 09:16:46 2012] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.780
[Sun Jul 15 09:16:46 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.27"
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src36.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src36.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src36.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:35:53 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun Jul 15 17:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun Jul 15 17:35:53 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Jul 15 17:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun Jul 15 17:35:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:36:15 2012] Source 37 is offset by 6.176426 and 2.815075 pixels which is larger than
2 X fitted extent = 2.769430 x 2.769430, not incorporating fit results
[Sun Jul 15 17:36:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:15 2012] Assessing source extent using major
[Sun Jul 15 17:36:15 2012] Source does appear to be extended
[Sun Jul 15 17:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:15 2012] Deleting source due to low Poisson probability 0.7