[Sat Jul 14 18:28:17 2012] Detection parameters:
  Position = (296.0, 235.3) = 17 30 39.01 -21 32 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 16.2
  Background counts = 78.3
  Rate = 0.003 +/- 0.0006

[Sat Jul 14 18:28:17 2012] Off-axis axis estimate = 4.58'
[Sun Jul 15 09:16:46 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:16:46 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Sun Jul 15 09:16:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Sun Jul 15 09:16:46 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.72"
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src33.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src33.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src33.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:35:53 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Jul 15 17:35:53 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Jul 15 17:35:53 2012] Fit fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Jul 15 17:36:15 2012] Spatial fit model total counts = 1114.910000, observed total counts = 1115.000000
[Sun Jul 15 17:36:15 2012] Offset between fit and detection position for source 33 = 0.533880 pixels
[Sun Jul 15 17:36:15 2012] 1132.100300 total counts/ 1098.620000 bgd. counts: snr = 1.010103
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.533880 pixels
  Position = (295.7, 234.8) = 17 30 39.10 -21 32 31.7
  Extent = 6.0 (2.2-10.6)", rotation angle = 0
  Source counts = 33.5 +/- 33.6
  Background counts = 1098.6
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability