[Sat Jul 14 18:28:17 2012] Detection parameters:
  Position = (281.1, 322.9) = 17 30 43.63 -21 26 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.8 +/- 19.4
  Background counts = 111.9
  Rate = 0.003 +/- 0.0007

[Sat Jul 14 18:28:17 2012] Off-axis axis estimate = 2.17'
[Sun Jul 15 09:16:46 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:16:46 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sun Jul 15 09:16:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Sun Jul 15 09:16:46 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.51"
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src29.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src29.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src29.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:35:53 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Jul 15 17:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun Jul 15 17:35:53 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Jul 15 17:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun Jul 15 17:35:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:36:15 2012] Source 20 is offset by -1.154078 and -3.389460 pixels which is larger than
2 X fitted extent = 1.285035 x 1.285035, not incorporating fit results
[Sun Jul 15 17:36:15 2012] Source 20 is offset by 1.006784 and -8.019184 pixels which is larger than
2 X fitted extent = 6.902299 x 6.902299, not incorporating fit results
[Sun Jul 15 17:36:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:15 2012] Assessing source extent using major
[Sun Jul 15 17:36:15 2012] Source does appear to be extended
[Sun Jul 15 17:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:15 2012] Deleting source due to low Poisson probability 0.8