[Sat Jul 14 18:28:17 2012] Detection parameters:
  Position = (298.8, 351.7) = 17 30 38.13 -21 24 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.4 +/- 16.6
  Background counts = 63.4
  Rate = 0.005 +/- 0.0007

[Sat Jul 14 18:28:17 2012] Off-axis axis estimate = 3.86'
[Sun Jul 15 09:16:46 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:16:46 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Sun Jul 15 09:16:46 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Sun Jul 15 09:16:46 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.36"
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src18.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src18.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:35:53 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jul 15 17:35:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jul 15 17:35:53 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jul 15 17:35:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jul 15 17:35:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:36:15 2012] Spatial fit model total counts = -440.250000, observed total counts = 670.000000
[Sun Jul 15 17:36:15 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 17:36:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:15 2012] Assessing source extent using major
[Sun Jul 15 17:36:15 2012] Source does appear to be extended
[Sun Jul 15 17:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:15 2012] Deleting source due to low Poisson probability 0.9