[Sat Jul 14 18:28:16 2012] Detection parameters:
  Position = (303.9, 287.0) = 17 30 36.52 -21 28 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67605.4 +/- 309.6
  Background counts = 137.2
  Rate = 2 +/- 0.01

[Sat Jul 14 18:28:17 2012] Off-axis axis estimate = 0.92'
[Sun Jul 15 09:16:46 2012] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:16:46 2012] Initial guess for spatial extent in simple fitting = 6.89"
[Sun Jul 15 09:16:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.921
[Sun Jul 15 09:16:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.89"
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 17:35:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 17:35:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 17:35:52 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 17:35:52 2012] Fit fullrun_mos2_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 17:36:15 2012] Spatial fit model total counts = 160556.000000, observed total counts = 168854.000000
[Sun Jul 15 17:36:15 2012] Offset between fit and detection position for source 1 = 4.253038 pixels
[Sun Jul 15 17:36:15 2012] 150758.000000 total counts/ 25600.000000 bgd. counts: snr = 782.237500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.253038 pixels
  Position = (301.3, 290.3) = 17 30 37.36 -21 28 30.4
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source counts = 125158.0 +/- 388.3
  Background counts = 25600.0
  Rate = 4 +/- 0.01
[Sun Jul 15 17:36:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:15 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 17:36:15 2012] Source does appear to be extended
[Sun Jul 15 17:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 12:06:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 12:06:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 12:06:30 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Mon Jul 16 12:06:30 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.911
[Mon Jul 16 12:06:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.78"
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 13:48:34 2012] Fit fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 13:48:34 2012] fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 13:48:34 2012] Fit fullrun_mos2_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 13:48:45 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Mon Jul 23 13:48:45 2012] Spatial fit model total counts = 192451.000000, observed total counts = 187314.000000
[Mon Jul 23 13:48:45 2012] Offset between fit and detection position for source 1 = 2.388475 pixels
[Mon Jul 23 13:48:45 2012] Warning, changing simple spatial fit ID from 1 to 5
[Mon Jul 23 13:48:45 2012] 169473.000000 total counts/ 40000.000000 bgd. counts: snr = 647.365000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.388475 pixels
  Position = (301.2, 292.7) = 17 30 37.38 -21 28 20.0
  Extent = 28.6 (28.6-28.6)", rotation angle = 0
  Source counts = 129473.0 +/- 411.7
  Background counts = 40000.0
  Rate = 4 +/- 0.01
[Mon Jul 23 13:48:45 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:45 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:48:45 2012] Source does appear to be extended
[Mon Jul 23 13:48:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:48:45 2012] Source is confused with source 2
[Mon Jul 23 13:48:45 2012] Source is confused with source 9
[Mon Jul 23 13:48:45 2012] Source is confused with source 4
[Mon Jul 23 13:48:45 2012] Source is confused with source 8
[Thu Jul 26 10:11:11 2012] Counts = 129473.000000, rescaling region sizes by 3.000000
[Thu Jul 26 10:11:11 2012] XMMSAS src. selection expression = ellipse(26156.216000, 25417.140000, 5154.732148, 5154.732148, 0.000000, X, Y)
[Thu Jul 26 10:11:11 2012] Writing source region out to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 26 10:11:11 2012] Extracting stamp from image fullrun_mos2_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (5, 0) - (595, 589)
[Thu Jul 26 10:11:11 2012] XMMSAS bgd. selection expression = annulus(26156.216000, 25417.140000, 25773.660742, 51547.321483, X, Y) && !ellipse(24725.528200, 25793.696120, 3351.192096, 3351.192096, 0.000000, X, Y) && !ellipse(25368.958000, 25788.824600, 3252.840094, 3252.840094, 0.000000, X, Y) && !ellipse(23791.701019, 24924.331207, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25612.570000, 24498.345000, 3436.488099, 3436.488099, 0.000000, X, Y) && !ellipse(24647.440857, 23793.599365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26659.998000, 24421.344000, 6612.816190, 6612.816190, 0.000000, X, Y) && !ellipse(23984.623413, 25556.241455, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24074.350128, 23610.906799, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(16057.259506, 28403.577179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.159680, 35923.428600, 502.835214, 346.791210, 19.595126, X, Y) && !ellipse(22774.992065, 17966.589310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26871.505798, 18985.561676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22584.822937, 25148.490021, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 10:11:11 2012] Writing fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1.gif
[Thu Jul 26 10:11:50 2012] Mean detx,y = (537.24, -471.05) 
[Thu Jul 26 10:11:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 10:13:05 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 10:13:07 2012] Setting source spectrum file to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 26 10:13:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 04:31:52 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:52 2012] Error reading totcts from fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 04:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:53 2012] Using photon index=1.80, rate=4.16, arf fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 04:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:53 2012] Updating source flux to 4.2e-11
[Fri Jul 27 04:48:59 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Jul 27 05:01:53 2012] Reading fit data from xmm0084100101/analysis//spectral/fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 27 05:01:53 2012] Spectral fit parameter nH value = 1.42573e+22
[Fri Jul 27 05:01:53 2012] Spectral fit parameter PhoIndex value = 9.99789
[Fri Jul 27 05:01:53 2012] Failed to get F(0.3-8.0) from xmm0084100101/analysis//spectral/fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 05:01:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 05:01:53 2012] Using Nh = 1.4e+22, photon index=10.00, rate=4.16, arf fullrun_mos2_xmm0084100101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 05:01:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 05:01:53 2012] Updating source flux to 2.3e-11