[Sat Jul 14 18:27:47 2012] Detection parameters:
  Position = (280.9, 272.9) = 17 30 43.69 -21 29 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28120.9 +/- 204.6
  Background counts = 131.4
  Rate = 0.9 +/- 0.007

[Sat Jul 14 18:27:48 2012] Off-axis axis estimate = 2.24'
[Sat Jul 14 23:02:16 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 23:02:16 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Sat Jul 14 23:02:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.800
[Sat Jul 14 23:02:16 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.55"
[Sun Jul 15 09:16:44 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jul 15 09:16:44 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jul 15 09:16:44 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src4 appears to have run properly
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jul 15 09:16:45 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Jul 15 17:36:09 2012] Spatial fit model total counts = 73796.200000, observed total counts = 77626.000000
[Sun Jul 15 17:36:09 2012] Offset between fit and detection position for source 6 = 2.724848 pixels
[Sun Jul 15 17:36:09 2012] 77813.200000 total counts/ 25600.000000 bgd. counts: snr = 326.332500
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.724848 pixels
  Position = (279.4, 270.7) = 17 30 44.16 -21 29 55.9
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source counts = 52213.2 +/- 279.0
  Background counts = 25600.0
  Rate = 2 +/- 0.009
[Sun Jul 15 17:36:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:09 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 17:36:09 2012] Source does appear to be extended
[Sun Jul 15 17:36:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 04:03:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 04:03:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 04:03:19 2012] Initial guess for spatial extent in simple fitting = 15.10"
[Mon Jul 16 04:03:19 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.015
[Mon Jul 16 04:03:19 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 15.10"
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src4.csv
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src4.csv
[Mon Jul 16 12:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jul 16 12:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:48:42 2012] Spatial fit model total counts = 175872.000000, observed total counts = 105524.000000
[Mon Jul 23 13:48:42 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 13:48:42 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:42 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:48:42 2012] Source does appear to be extended
[Mon Jul 23 13:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 09:55:25 2012] Counts = 52213.200000, rescaling region sizes by 3.000000
[Wed Jul 25 09:55:25 2012] XMMSAS src. selection expression = ellipse(24261.714400, 23499.824000, 2717.856078, 2717.856078, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing source region out to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul 25 09:55:25 2012] Extracting stamp from image fullrun_mos1_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (123, 114) - (436, 427)
[Wed Jul 25 09:55:25 2012] XMMSAS bgd. selection expression = annulus(24261.714400, 23499.824000, 13589.280391, 27178.560782, X, Y) && !ellipse(26158.950000, 25511.772000, 6872.832198, 6872.832198, 0.000000, X, Y) && !ellipse(24607.386000, 25670.915340, 5394.480155, 3909.528112, -0.000000, X, Y) && !ellipse(25286.252000, 25779.519200, 3260.760094, 3260.760094, 0.000000, X, Y) && !ellipse(25798.186000, 24428.805400, 3436.416099, 3436.416099, 0.000000, X, Y) && !ellipse(26516.086000, 23779.378660, 3260.760094, 3260.760094, -0.000000, X, Y) && !ellipse(25545.591000, 24765.686000, 3436.416099, 3436.416099, 0.000000, X, Y) && !ellipse(24990.120000, 21972.904000, 1285.936037, 1285.936037, 0.000000, X, Y) && !ellipse(24563.356079, 22299.524109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22764.844543, 18003.901764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16036.708252, 28384.723816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27148.507660, 22838.532227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22002.480000, 21690.288000, 1356.376039, 1356.376039, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src6.gif
[Wed Jul 25 10:14:48 2012] Mean detx,y = (-52.58, -407.77) 
[Wed Jul 25 10:14:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 10:27:30 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 10:27:30 2012] Setting source spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 25 10:27:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jul 27 04:31:51 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:51 2012] Error reading totcts from fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 27 04:31:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:52 2012] Using photon index=1.80, rate=1.68, arf fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src6.arf
[Fri Jul 27 04:31:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:52 2012] Updating source flux to 1.7e-11
[Fri Jul 27 04:31:54 2012] Flag p found in src. 6 procflags, skipping spectral fitting