[Sat Jul 14 18:27:47 2012] Detection parameters:
  Position = (303.9, 273.0) = 17 30 36.54 -21 29 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18559.2 +/- 172.4
  Background counts = 121.6
  Rate = 0.6 +/- 0.006

[Sat Jul 14 18:27:48 2012] Off-axis axis estimate = 1.89'
[Sat Jul 14 23:02:16 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 23:02:16 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Sat Jul 14 23:02:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Sat Jul 14 23:02:16 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.37"
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src6.csv
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src6.csv
[Sun Jul 15 09:16:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jul 15 09:16:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:36:09 2012] Spatial fit model total counts = 69751.100000, observed total counts = 81487.000000
[Sun Jul 15 17:36:09 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 17:36:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:09 2012] Assessing source extent using major
[Sun Jul 15 17:36:09 2012] Source does appear to be extended
[Sun Jul 15 17:36:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 04:03:19 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 04:03:19 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Mon Jul 16 04:03:19 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Mon Jul 16 04:03:19 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.37"
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jul 16 12:06:29 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src6 appears to have run properly
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jul 16 12:06:29 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Jul 23 13:48:42 2012] Spatial fit model total counts = 77970.900000, observed total counts = 81487.000000
[Mon Jul 23 13:48:42 2012] Offset between fit and detection position for source 5 = 1.688480 pixels
[Mon Jul 23 13:48:42 2012] 57443.500000 total counts/ 25600.000000 bgd. counts: snr = 199.021875
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.688480 pixels
  Position = (305.3, 273.9) = 17 30 36.09 -21 29 41.9
  Extent = 13.6 (13.6-27.2)" x 13.6 (13.6-27.2)", rotation angle = -0
  Source counts = 31843.5 +/- 239.7
  Background counts = 25600.0
  Rate = 1 +/- 0.008
[Mon Jul 23 13:48:42 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:42 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:48:42 2012] Source does appear to be extended
[Mon Jul 23 13:48:42 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Wed Jul 25 09:55:25 2012] Counts = 31843.500000, rescaling region sizes by 3.000000
[Wed Jul 25 09:55:25 2012] XMMSAS src. selection expression = ellipse(26516.086000, 23779.378660, 2445.570070, 2445.570070, -0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing source region out to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src5_src.reg
[Wed Jul 25 09:55:25 2012] Extracting stamp from image fullrun_mos1_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (165, 133) - (446, 414)
[Wed Jul 25 09:55:25 2012] XMMSAS bgd. selection expression = annulus(26516.086000, 23779.378660, 12227.850352, 24455.700704, X, Y) && !ellipse(26158.950000, 25511.772000, 6872.832198, 6872.832198, 0.000000, X, Y) && !ellipse(24607.386000, 25670.915340, 5394.480155, 3909.528112, -0.000000, X, Y) && !ellipse(25286.252000, 25779.519200, 3260.760094, 3260.760094, 0.000000, X, Y) && !ellipse(24261.714400, 23499.824000, 3623.808104, 3623.808104, 0.000000, X, Y) && !ellipse(25798.186000, 24428.805400, 3436.416099, 3436.416099, 0.000000, X, Y) && !ellipse(25545.591000, 24765.686000, 3436.416099, 3436.416099, 0.000000, X, Y) && !ellipse(24990.120000, 21972.904000, 1285.936037, 1285.936037, 0.000000, X, Y) && !ellipse(24563.356079, 22299.524109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22764.844543, 18003.901764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16036.708252, 28384.723816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27148.507660, 22838.532227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22002.480000, 21690.288000, 1356.376039, 1356.376039, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src5.gif
[Wed Jul 25 10:41:58 2012] Mean detx,y = (38.57, -1114.82) 
[Wed Jul 25 10:42:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 10:55:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 10:55:31 2012] Setting source spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 25 10:55:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul 27 04:31:51 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:51 2012] Error reading totcts from fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 27 04:31:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:52 2012] Using photon index=1.80, rate=1.03, arf fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src5.arf
[Fri Jul 27 04:31:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:52 2012] Updating source flux to 1.1e-11
[Fri Jul 27 04:31:54 2012] Flag p found in src. 5 procflags, skipping spectral fitting