[Sat Jul 14 18:27:47 2012] Detection parameters:
  Position = (292.9, 279.0) = 17 30 39.95 -21 29 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21810.3 +/- 182.4
  Background counts = 132.5
  Rate = 0.7 +/- 0.006

[Sat Jul 14 18:27:48 2012] Off-axis axis estimate = 1.46'
[Sat Jul 14 23:02:16 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 23:02:16 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Sat Jul 14 23:02:16 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Sat Jul 14 23:02:16 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.16"
[Sun Jul 15 09:16:44 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jul 15 09:16:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src5.csv
[Sun Jul 15 09:16:44 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src5.csv
[Sun Jul 15 09:16:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jul 15 09:16:45 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jul 15 17:36:09 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Sun Jul 15 17:36:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:09 2012] Assessing source extent using major
[Sun Jul 15 17:36:09 2012] Source does appear to be extended
[Sun Jul 15 17:36:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:09 2012] Source is confused with source 3
[Mon Jul 16 04:03:19 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 04:03:19 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Mon Jul 16 04:03:19 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Mon Jul 16 04:03:19 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.16"
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src5.csv
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src5.csv
[Mon Jul 16 12:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jul 16 12:06:29 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jul 23 13:48:42 2012] Spatial fit model total counts = 79854.600000, observed total counts = 82249.000000
[Mon Jul 23 13:48:42 2012] Offset between fit and detection position for source 4 = 4.743774 pixels
[Mon Jul 23 13:48:42 2012] 54459.200000 total counts/ 25600.000000 bgd. counts: snr = 180.370000
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.743774 pixels
  Position = (297.1, 281.3) = 17 30 38.66 -21 29 9.4
  Extent = 14.3 (14.3-28.6)", rotation angle = 0
  Source counts = 28859.2 +/- 233.4
  Background counts = 25600.0
  Rate = 0.9 +/- 0.008
[Mon Jul 23 13:48:42 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:42 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:48:42 2012] Source does appear to be extended
[Mon Jul 23 13:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 09:55:25 2012] Counts = 28859.200000, rescaling region sizes by 3.000000
[Wed Jul 25 09:55:25 2012] XMMSAS src. selection expression = ellipse(25798.186000, 24428.805400, 2577.312074, 2577.312074, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing source region out to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src4_src.reg
[Wed Jul 25 09:55:25 2012] Extracting stamp from image fullrun_mos1_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (149, 133) - (445, 429)
[Wed Jul 25 09:55:25 2012] XMMSAS bgd. selection expression = annulus(25798.186000, 24428.805400, 12886.560371, 25773.120742, X, Y) && !ellipse(26158.950000, 25511.772000, 6872.832198, 6872.832198, 0.000000, X, Y) && !ellipse(24607.386000, 25670.915340, 5394.480155, 3909.528112, -0.000000, X, Y) && !ellipse(25286.252000, 25779.519200, 3260.760094, 3260.760094, 0.000000, X, Y) && !ellipse(24261.714400, 23499.824000, 3623.808104, 3623.808104, 0.000000, X, Y) && !ellipse(26516.086000, 23779.378660, 3260.760094, 3260.760094, -0.000000, X, Y) && !ellipse(25545.591000, 24765.686000, 3436.416099, 3436.416099, 0.000000, X, Y) && !ellipse(24990.120000, 21972.904000, 1285.936037, 1285.936037, 0.000000, X, Y) && !ellipse(24563.356079, 22299.524109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22764.844543, 18003.901764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16036.708252, 28384.723816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27148.507660, 22838.532227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22002.480000, 21690.288000, 1356.376039, 1356.376039, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src4.gif
[Wed Jul 25 10:28:12 2012] Mean detx,y = (-202.28, -716.36) 
[Wed Jul 25 10:28:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 10:41:18 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 10:41:18 2012] Setting source spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul 25 10:41:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 27 04:31:51 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:51 2012] Error reading totcts from fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 27 04:31:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:52 2012] Using photon index=1.80, rate=0.93, arf fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src4.arf
[Fri Jul 27 04:31:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:52 2012] Updating source flux to 9.7e-12
[Fri Jul 27 04:31:54 2012] Flag c found in src. 4 procflags, skipping spectral fitting