[Sat Jul 14 18:27:47 2012] Detection parameters:
  Position = (357.4, 418.7) = 17 30 19.88 -21 19 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.2 +/- 15.9
  Background counts = 12.4
  Rate = 0.005 +/- 0.0005

[Sat Jul 14 18:27:48 2012] Off-axis axis estimate = 9.71'
[Sat Jul 14 23:02:16 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 23:02:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 23:02:16 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Sat Jul 14 23:02:16 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.097
[Sat Jul 14 23:02:16 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.28"
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src18.csv
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src18.csv
[Sun Jul 15 09:16:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jul 15 09:16:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 17:36:09 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.746030 pixels away
[Sun Jul 15 17:36:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:09 2012] Assessing source extent using major
[Sun Jul 15 17:36:09 2012] Source does appear to be extended
[Sun Jul 15 17:36:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:09 2012] Deleting source due to low Poisson probability 0.9