[Sat Jul 14 18:27:47 2012] Detection parameters:
  Position = (304.2, 287.0) = 17 30 36.44 -21 28 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55783.4 +/- 292.9
  Background counts = 120.2
  Rate = 2 +/- 0.01

[Sat Jul 14 18:27:48 2012] Off-axis axis estimate = 0.93'
[Sat Jul 14 23:02:16 2012] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 23:02:16 2012] Initial guess for spatial extent in simple fitting = 6.89"
[Sat Jul 14 23:02:16 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.921
[Sat Jul 14 23:02:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.89"
[Sun Jul 15 09:16:44 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 09:16:44 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 09:16:44 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 09:16:45 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 17:36:09 2012] Spatial fit model total counts = 145911.000000, observed total counts = 158429.000000
[Sun Jul 15 17:36:09 2012] Offset between fit and detection position for source 2 = 4.566710 pixels
[Sun Jul 15 17:36:09 2012] 136264.000000 total counts/ 25600.000000 bgd. counts: snr = 691.650000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.566710 pixels
  Position = (301.0, 290.3) = 17 30 37.45 -21 28 30.7
  Extent = 13.8 (13.8-27.6)", rotation angle = 0
  Source counts = 110664.0 +/- 369.1
  Background counts = 25600.0
  Rate = 4 +/- 0.01
[Sun Jul 15 17:36:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:09 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 17:36:09 2012] Source does appear to be extended
[Sun Jul 15 17:36:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 17:36:09 2012] Source is confused with source 3
[Mon Jul 16 04:03:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 04:03:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 04:03:19 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Mon Jul 16 04:03:19 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.040
[Mon Jul 16 04:03:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.78"
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 16 12:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 16 12:06:29 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 13:48:42 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Mon Jul 23 13:48:42 2012] Spatial fit model total counts = 198700.000000, observed total counts = 200575.000000
[Mon Jul 23 13:48:42 2012] Offset between fit and detection position for source 2 = 3.548893 pixels
[Mon Jul 23 13:48:42 2012] Warning, changing simple spatial fit ID from 1 to 7
[Mon Jul 23 13:48:42 2012] 174789.000000 total counts/ 40000.000000 bgd. counts: snr = 673.945000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.548893 pixels
  Position = (301.2, 293.8) = 17 30 37.37 -21 28 15.3
  Extent = 28.6 (28.6-57.3)", rotation angle = 0
  Source counts = 134789.0 +/- 418.1
  Background counts = 40000.0
  Rate = 4 +/- 0.01
[Mon Jul 23 13:48:42 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:42 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 13:48:42 2012] Source does appear to be extended
[Mon Jul 23 13:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 09:55:25 2012] Counts = 134789.000000, rescaling region sizes by 3.000000
[Wed Jul 25 09:55:25 2012] XMMSAS src. selection expression = ellipse(26158.950000, 25511.772000, 5154.624148, 5154.624148, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing source region out to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 25 09:55:25 2012] Extracting stamp from image fullrun_mos1_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (5, 0) - (595, 590)
[Wed Jul 25 09:55:25 2012] XMMSAS bgd. selection expression = annulus(26158.950000, 25511.772000, 25773.120742, 51546.241483, X, Y) && !ellipse(24607.386000, 25670.915340, 5394.480155, 3909.528112, -0.000000, X, Y) && !ellipse(25286.252000, 25779.519200, 3260.760094, 3260.760094, 0.000000, X, Y) && !ellipse(24261.714400, 23499.824000, 3623.808104, 3623.808104, 0.000000, X, Y) && !ellipse(25798.186000, 24428.805400, 3436.416099, 3436.416099, 0.000000, X, Y) && !ellipse(26516.086000, 23779.378660, 3260.760094, 3260.760094, -0.000000, X, Y) && !ellipse(25545.591000, 24765.686000, 3436.416099, 3436.416099, 0.000000, X, Y) && !ellipse(24990.120000, 21972.904000, 1285.936037, 1285.936037, 0.000000, X, Y) && !ellipse(24563.356079, 22299.524109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22764.844543, 18003.901764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16036.708252, 28384.723816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27148.507660, 22838.532227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22002.480000, 21690.288000, 1356.376039, 1356.376039, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2.gif
[Wed Jul 25 09:55:54 2012] Mean detx,y = (-209.56, -638.26) 
[Wed Jul 25 09:55:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 09:56:59 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 09:57:00 2012] Setting source spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 09:57:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 27 04:31:51 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:51 2012] Error reading totcts from fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 27 04:31:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:51 2012] Using photon index=1.80, rate=4.34, arf fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 27 04:31:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:51 2012] Updating source flux to 4.5e-11
[Fri Jul 27 04:31:54 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jul 27 04:48:59 2012] Reading fit data from xmm0084100101/analysis//spectral/fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 27 04:48:59 2012] Spectral fit parameter nH value = 1.42318e+22
[Fri Jul 27 04:48:59 2012] Spectral fit parameter PhoIndex value = 9.99971
[Fri Jul 27 04:48:59 2012] Failed to get F(0.3-8.0) from xmm0084100101/analysis//spectral/fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 04:48:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:48:59 2012] Using Nh = 1.4e+22, photon index=10.00, rate=4.34, arf fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 27 04:48:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:48:59 2012] Updating source flux to 2.5e-11